785261
6
Zoom out
Zoom in
Previous page
1/75
Next page
4
Main display: battery1 voltage, battery state of charge, charging
status.
If arrow is flashing charger is in float.
By arrow of: no solar available.
Press MENU to enter next display.
Main display.
Press the MENU
button for several
seconds until the
display flashes, you are
Battery type setting.
See table below.
The factory setting is b01
Press on the MENU
key again and you
are in:
Charging Ratio of Battery 1
Current ratio to battery1
20% means 20% of available current
to battery 1 and 80% to Battery2
during Bulk phase.
The factory setting is 50%
Note: In the normal charging status, the controller will divide the charging as the setting.
When battery #1 is fully charged, more charge current will go to battery #2.
When the controller detects that only battery #1 is connected, all the charge current will go
to the battery #1 automatically.
Press on the MENU
key again and you
are in:
Charging Frequency
Frequency switching between
Battery1 and Battery2: 25, 50 or
100Hz
The factory setting is 25Hz
Battery type
Battery
voltage
Absorbtion
voltage
Float voltage
Low voltage
disconnect
Low voltage
reconnect
b01
LEAD-ACID
[AGM]
12.0V [24V] 14.4V [28.8V] 13.7V [27.4V] 11.2V [22.4V] 12.6V [25.2V]
b02
LEAD-ACID
[Gel]
12.0V [24V] 14.2V [28.4V] 13.7V [27.4V] 11.2V [22.4V] 12.6V [25.2V]
b03
LEAD-ACID
[Wet]
12.0V [24V] 14.6V [29.2V] 13.7V [27.4V] 11.2V [22.4V] 12.6V [25.2V]
b04 LiFePO4 12.8V 14.2V 13.35V 11.2V 12.6V
b05 LiFePO4 25.6V 28.4V 26.7V 22.4V 25.2V
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron BlueSolar PWM DUO LCD SB 12 24V 20A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron BlueSolar PWM DUO LCD SB 12 24V 20A in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 1.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info