785372
8
Zoom out
Zoom in
Previous page
1/80
Next page
4
3. Safety precaution for installing a solar photovoltaic system
Solar modules produce electrical energy when light shines on their front surface. The DC voltage may exceed 30V. If modules are
connected in series, the total voltage is equal to the sum of the individual module voltages. If modules are connected in parallel, the total
current is equal to the sum of individual module currents.
Keep children well away from the system while transporting and installing mechanical and electrical components.
Completely cover the module with an opaque material during installation to keep electricity from being generated.
Do not wear metallic rings, watchbands, ear, nose, lip rings or other metallic devices while installing or troubleshooting photovoltaic
systems.
Use only insulated tools that are approved for working on electrical installations.
Abide with the safety regulations for all other components used in the system, including wiring and cables, connectors, charging
regulators, inverters, storage batteries and rechargeable batteries, etc.
Use only equipment, connectors, wiring and support frames suitable for a solar electric system. Always use the same type of module
within a particular photovoltaic system.
The electrical characteristics are within ±10 percent of the indicated values of Isc, Voc, and Pmax under standard test conditions
(irradiance of 100mW/cm2, AM 1.5 spectrums, and a cell temperature of 25°C (77°F))
Under normal outdoor conditions the module will produce current and voltages that are different than those listed in the date sheet. Data
sheet values are values expected at standard test conditions. Accordingly, during system design, values of short-circuit current and
open-circuit voltage should be multiplied by a factor of 1.25 when determining component voltage ratings, conductor capacity, fuse
ratings and size of controls connected to the modules or system output.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron BlueSolar 100Wp poly at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron BlueSolar 100Wp poly in the language / languages: English, German, Dutch, French, Swedish, Spanish as an attachment in your email.

The manual is 1.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info