785335
63
Zoom out
Zoom in
Previous page
1/99
Next page
9
EN NL FR DE ES SE FI
Secuencia de carga de ocho etapas para baterías de plomo-
ácido:
1. CHARGE/TEST (carga/comprobación)
Compruebe si la batería puede aceptar carga, incluso si la
batería está completamente descargada (cero voltios o casi
en todos los terminales).
Todos los LED de estado de carga parpadearán en caso de
polaridad inversa, cortocircuito o en caso de que un
cargador de 12V esté conectado a una batería de 24V.
El LED TEST (carga) parpadeará siempre y cuando
ninguna carga por pulso incremente la tensión de la batería
a más de 12,5V o 25V, respectivamente.
Si el parpadeo persiste durante varios minutos, la batería
estará probablemente dañada (corto circuito interno):
desconecte el cargador.
Podría producirse un rechazo falso si hubiera una carga
drenando simultáneamente una batería muy débil o
completamente descargada durante la fase de
comprobación: desconecte la carga y repita la
comprobación.
El cargador puede conmutarse a modo de corriente baja
(ver especificaciones técnicas) pulsando el botón MODE
durante 3 segundos. Uno de los cuatro LED MODE
parpadeará cuando esté en modo de corriente baja.
El modo de corriente baja permanece activo hasta que se
vuelva a pulsar el botón MODE durante 3 segundos.
2. BULK (inicial)
Carga la batería con la máxima corriente hasta alcanzar la
tensión de absorción. En ese momento la batería estará
cargada al 80% y estará lista para usar.
3. ABS - (Absorción)
Carga la batería a una tensión constante y corriente
decreciente hasta que esté completamente cargada.
Véase en la tabla más arriba la tensión de absorción a
temperatura ambiente.
Gestión adaptativa de la batería:
El tiempo de absorción será breve (mínimo 30 minutos) si
la batería estaba (casi) completamente cargada, y
aumentará hasta 8 horas en el caso de baterías
profundamente descargadas.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron Blue Smart IP65 Acculader 12 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron Blue Smart IP65 Acculader 12 10 in the language / languages: English, German, Dutch, French, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info