785214
137
Zoom out
Zoom in
Previous page
1/334
Next page
11
NL FR DE ES SE IT PT
EN NL FR DE ES SE IT PT
2.2 Synchronisierung des BMV
Um eine verlässliche Anzeige zu erhalten, muss der durch den
Batteriewächter angezeigte Ladezustand regelmäßig mit dem
tatsächlichen Ladezustand der Batterie synchronisiert werden. Dies
erfolgt durch das vollständige Aufladen der Batterie.
Bei einer 12V Batterie wird der BMV auf 'vollständig aufgeladen‘
zurückgesetzt, wenn die folgenden 'Voll-Ladeparameter‘ erfüllt werden:
Die Spannung übersteigt 13,2V und gleichzeitig liegt der (Schweif-)
Ladestrom 3 Minuten lang unter 4,0% der gesamten Batteriekapazität
(z. B. 8A bei einer 200Ah Batterie).
Der BMV lässt sich bei Bedarf auch manuell synchronisieren (d. h. auf
"Batterie voll aufgeladen" einstellen). Hierfür müssen entweder im
normalen Betriebsmodus die Tasten + und drei Sekunden lang
gleichzeitig gedrückt werden oder im Setup-Modus die Option SYNC
verwendet werden (siehe Punkt 4.2.1 Einstellung Nummer 10).
Der BMV ist standardmäßig so konfiguriert, dass er in einem
synchronisierten Zustand startet und einen Ladezustand von 100 %
anzeigt. Diese Einstellung kann jedoch geändert werden: Beachten Sie
hierzu Abschnitt 4.2.1, Einstellung Nummer 70.
Sollte die Synchronisierung des BMV nicht automatisch starten, kann es
erforderlich sein, den Wert für die "Voll-Ladungs-Spannung", den
Schweifstrom und/oder die Ladezeit anzupassen.
Nach einer Unterbrechung der Spannungsversorgung zum BMV, muss
der Batteriewächter erst wieder synchronisiert werden, bevor er korrekt
arbeiten kann.
Nach der ersten Synchronisation (automatisch oder manuell) verfolgt das
BMV die Anzahl der automatischen Synchronisationen: siehe Abschnitt
4.3, Verlaufspunkt SYNCHRONIZATIONS.
2.3 Häufige Probleme
Keine Anzeigen auf dem Display
Vermutlich ist der BMV nicht ordnungsgemäß angeschlossen. Das UTP-
Kabel muss an beiden Enden ordentlich eingeführt sein, der Shunt muss
an den Minus-Pol der Batterie angeschlossen sein und das positive
Stromversorgungskabel muss an den Plus-Pol der Batterie
angeschlossen sein, wobei die Sicherung eingesetzt sein muss.
137


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron batterij monitor BMV 700H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron batterij monitor BMV 700H in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 2.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info