Manual Victoria FY-780 (page 27 of 57) (German)

534466

Zoom out

Zoom in

1/57

Beim Nähen eines rechten Winkels ist darauf zu

achten, dass ein gleichmäßiger Abstand zum

Stoffrand beibehalten wird. Wenn Sie sich beim

Nähen eines rechten Winkels der Eckmarkierun-

gen bedienen möchten, wählen Sie eine Saum-

breite von 1,6 cm (5/8). Halten Sie die Nähma-

schine an, wenn der Stoffrand sich auf gleicher

Höhe mit der Eckmarkierung 2 befindet. Bewegen

Sie das Handrad auf sich zu, um die Nadel in den

Stoff zu bringen. Heben Sie den Nähfuß an und

drehen Sie den Stoff so lange in die gewünschte

Richtung, bis die Kante wieder mit der Stichplat-

tenmarkierung 5/8 abschließt. Senken Sie dann

den Nähfuß und fahren Sie mit dem Nähen fort.

1 Alignment marks

2 Comer marks

3 Needle plate

4 Hole of needle plate

Make sure that you keep an even distance be-

tween the needle and the fabric edge when turn-

ing corners. The corner marks on the stitch plate

will help you turn corners more easily. For this

purpose, use a seam width of 5/8 inches (1.6 cm)

and sew until the front edge of the fabric is alig-

ned with corner mark 2. Then stop the machine

and turn the handwheel towards you to lower the

needle into the fabric. Raise the presser foot, turn

the fabric around the needle, using the needle as

a pivot, until the fabric edge is aligned with the

alignment mark 5/8. Then lower the presser foot

and sew in the new direction.

1 Stichplattenmarkierungen

2 Eckmarkierungen

3 Stichplatte

4 Stichloch

Nähen eines rechten Winkels

Turning corners

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Victoria FY-780 in the language / languages: German as an attachment in your email.

The manual is 11,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Victoria FY-780 Manual

Product: