Manual Victoria FY-780 (page 19 of 57) (German)

534466

Zoom out

Zoom in

1/57

Heraufholen des Unterfadens Pulling up the bobbin thread

1. Heben Sie den Nähfuß an und halten Sie das

Ende des Oberfadens locker in Ihrer Iinken

Hand.

2. Bewegen Sie das Handrad so lange auf sich

zu, bis sich der Fadengeber in seiner

höchsten Position befindet. Ziehen Sie nun

leicht am Oberfaden, um den Unterfaden

heraufzuholen.

3. Ziehen Sie beide Fäden etwa 5 cm heraus

und führen Sie beide Fäden unter dem Nähfuß

hindurch nach hinten.

1. Lift the presser foot and hold the upper thread

lightly with your left hand.

2. Keep turning the handwheel toward you until

the thread take-up Iever is at its highest

position. Pull the needle thread in order to pull

up the bobbin thread.

3. Draw about 5 cm of both threads out and put

them to the rear underneath the presser foot.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Victoria FY-780 in the language / languages: German as an attachment in your email.

The manual is 11,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Victoria FY-780 Manual

Product: