471279
6
Zoom out
Zoom in
Previous page
1/30
Next page
6
7. Threading
ƽ
Warning!:
Before threading, make sure that the
sewing machine is switched off, or
that the power plug has been pulled
out of the power socket, as accidents
may be caused if the machine is started
unintentionally.
a) Threading the lower bobbin
To fill the lower bobbin with thread:
Pull out one of the two roll pins and
put on a spool of thread.
You can put a felt pad under the
spool of thread, to protect the
machine casing.
Place an empty bobbin on the
winder spindle and wind the loose
end of the thread on, giving several
turns anticlockwise.
Pull out the handwheel slightly, to
disengage the sewing mechanism
from the motor.
Pull the thread through the thread
guide for the winder tension.
µ After the first few turns of thread are
taut on the bobbin, press the bobbin
against the winder stopper.
Now switch on the sewing machine
and step on the foot switch. When
the bobbin is full, cut the thread.
Press the winder spindle forward
again and take out the full bobbin.
Do not forget to press the handwheel
back in, otherwise the sewing mech-
anism remains disengaged from the
motor.
²
¾
µ
IB_Sewingmachine_content_UK.qxd 22.07.2004 12:21 Uhr Seite 6
6


Need help? Post your question in this forum.

Forumrules
1

Forum

victoria-270e

Reset search

  • Having problems with stitch program
    A is not doing straight stitches it only doing zzags stitches at times do M Submitted on 5-11-2020 at 13:16

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victoria 270E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victoria 270E in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Victoria 270E

Victoria 270E User Manual - German - 30 pages

Victoria 270E User Manual - Dutch, French - 87 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info