Manual Vicks V977 (page 8 of 12) (English)

650702

Zoom out

Zoom in

1/12

6. Directions for Use

1. Press the Power button on front of unit. The LCD is activated to

show all segments for 2 seconds.

2. The last measurement reading will be shown on the display

automatically for 3 seconds with the «M» icon.

3. When the °F icon is ﬂashing, a beep sound is heard and the

thermometer is ready for the measurement.

4. Place the probe gently and ﬂush onto the area approximately 1/2 inch

above the center of the eyebrow. If the eyebrow area is covered with

hair, sweat or dirt, please clean the area beforehand to improve the

reading accuracy.

5. Press the Power button once and release it. Start to move the

instrument steadily from 1/2 inch above the center of the eyebrow to

1/2 inch above the tail of the eyebrow area and back up again. A long

beep will sound after 3 seconds to signal measurement complete.

If the probe movement is too slow to reach the tail of the eyebrow

before the long beep sound is heard, repeat the measurement as

above from step 4, and move the probe a little quicker this time.

6. Read the recorded temperature from the LCD display.

(4)

(1)

(2)

(3)

(5)

(6)

To avoid an inaccurate measurement, note the following:

• Patients should stay in steady - state room condition for at least 30 minutes.

• Don’t remove the measurement device from the measuring area before hearing the

ﬁnal beep.

• Don’t take a measurement while or immediately after nursing a baby.

• Don’t use the forehead thermometer in high humidity environments.

• Patients should not drink, eat, or be physically active before/while taking the measurement.

• Before placing the thermometer sensor onto the measurement area, remove dirt, hair,

or sweat.

• Use an alcohol swab to carefully clean the sensor and wait for 5 minutes before taking a

measurement on another patient.

• Always take the temperature in the same location, since the temperature readings may

vary from different locations.

Thermometer seems to be stuck in memory mode. Won’t return to taking temperature mode. Flashing M with a reading on the screen. Can’t get out of this mode. Submitted on 12-10-2020 at 16:15
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vicks V977 in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vicks V977 Manual

Product: