484572

Vibiemme Vibiemme Double Domobar version 3 Manual

2
Zoom out
Zoom in
Previous page
1/3
Next page
NOTES regarding the steam boiler: it takes about 5 minutes for the steam boiler to reach
temperature. The steam boiler also provides hot water to the water spout. During warm up, it is
normal to hear the anti-vacuum valve hissing until enough pressure has built inside the boiler to
shut the valve.
8. Once the pre-set pressure has been reached, the pressurestat will terminate power to the
heating element and the left light will go OFF. Let out a couple of steam bursts and you
are ready to steam milk.
Thanks to the double-boiler technology, there are separate circuits within the machine for heating
the brew boiler and the steam boiler. Personally, I recommend leaving the power switch in
position “I” (thus NOT connecting disengaging the steam heating element) unless you are
preparing to steam milk or lengthen shots with hot water (Americano).
There are a few advantages to leaving an unused steam boiler off:
• Less maximum electricity consumption (600w versus 1600w)
• Less heat dispersion into the ambient
• Less wear and tear on some components
• Safer if you intend to put your machine on a timer.
PID Function:
Although the PID is pre-set by the factory, one convenience of the double boiler machine is that
you can customize your brewing temp without sacrificing steam pressure. (PID vs. pressurestat.)
WARNING: you can really mess up the settings, so if you have to change some parameters, make
sure you jot down the original settings in your owner’s manual before following these steps:
Changing from C to F or vice versa:
1. Turn the machine off
2. While holding both buttons of the PID (- & +), turn the machine back on.
3. Keep holding the buttons. The display will show the software version (ex. 1.00)
4. In 3 seconds, the display will show F03. You are now in programming mode.
5. Release both buttons and push the right button until the display shows F.
6. Stop pushing buttons. After 3 seconds, the display will go back to F03.
7. You are now in F. Turn machine off and back on.
To scroll from F to C push the RIGHT button until the desired value is shown.
WARNING: IF YOU TOUCH THE LEFT BUTTON WHILE IN PROGRAMMING MODE,
YOU WILL MODIFY THE PID PARAMETER, MAKING THE MACHINE FUNCTION
IMPROPERLY.
IF you must modify the PID values, then once in the F03 mode:
1. Push the left button; display will show P.
2. Once P is displayed, push the right button.
3. The set value will show (ex 1.8).
v.7/09
2
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vibiemme Vibiemme Double Domobar version 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vibiemme Vibiemme Double Domobar version 3 in the language / languages: English as an attachment in your email.

The manual is 0,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vibiemme Vibiemme Double Domobar version 3

Vibiemme Vibiemme Double Domobar version 3 User Manual - English - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info