661551

Vetus IV60012 Manual

17
Zoom out
Zoom in
Previous page
1/60
Next page
090134.01 17
Inverter type IV60012, IV60024, IV100012, IV100024, IV150012, IV150024, IV200012, IV200024, IV300012, IV300024
ENGLISH
5.4 Remote control panel
The remote control panel can be used for the following func-
tions.
Operating the inverter from the remote control panel is done as
follows:
Switching on and off:
- Use the
key to switch on. The ‘ON’ LED shows that the
inverter has been switched on.
- Use the
key to switch off.
Reset after an overload:
- The inverter can be switched on again after an overload with
the
key.
Power Save Mode:
• The Power Save Mode is switched on and off with the
key. The ‘PWRS’ LED shows that the Power Save Mode is
switched on.
Select display:
-
key: the output voltage (AC) in Volts.
-
key: the power in Watts supplied by the inverter to the
users.
-
key: the battery voltage in Volts.
What function has been selected is shown in
the display with a dot.
‘COM’ LED:
This comes on when there is communication with the inverter.
‘ALARM’ LED:
This comes on if there is an alarm or a fault.
6 Faults
Fault finding table
Fault/indicator Possible cause Solution
‘LOAD’ LED bar flashes. Output overloaded. Reduce the loading.
No output voltage and the ‘BATT’ LED bar
is in the bottom red area.
Battery voltage too low. Charge the batteries.
Check the battery wire and the connec-
tions.
No output voltage and the ‘TEMP HI’ LED
is on.
Extremely high ambient temperature. Let the inverter cool down.
Ventilation openings blocked. Clear the ventilation openings.
Inverter is positioned in a poorly venti-
lated space.
Change the position.
Inverter is positioned in the vicinity of a
source of heat.
Change the position.
Fault in the inverter, for example a faulty
fan.
Have the inverter repaired.
No output voltage and the ‘OVERLOAD’
LED is on.
Output overloaded. Reduce the loading.
Output short-circuited. Check and correct the connections to the
output.
Interference in the picture on a television when particular chan-
nels are selected can often be solved by carrying out one of the
following steps:
• Make sure that the earth connection on the back of the
inverter is connected to the earth of the ship
• Donotswitchonanyothermajorcurrentuserswhilewatch-
ing TV
• Makesurethatthereisnointerferenceonthepowersupply
to the TV antenna
• Useagoodqualityantennacable
• PositiontheTVasfarfromtheinverteraspossible
• Keepthewiresbetweenthebatteryandtheinverterasshort
as possible and twist the battery wires about 1 x per 10 cm of
wire length
WARNING!
Life-threatening voltages are present in the inverter! Therefore,
never open the inverter yourself. Attempts to carry out repairs
yourself can incur the risk of an electric shock or fire.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vetus IV60012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vetus IV60012 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info