661547
59
Zoom out
Zoom in
Previous page
1/80
Next page
Battery charger / inverter COMBI-GAMMA
090138.02 59
B3 Group (Parallel System)
B3-01: Number of Slaves
A parallel system is built with 1 master and up to 4 slaves with this setting, one can spec-•
ify the number of slaves in the system. This setting has only to be done in the master.
It is not required to specify the number of slaves. The system will work just fine without
this setting being specified.
This setting is added for convenience of the end-user when the AC IN power is larger •
than the total of B2-05* the number of the Combi-Gamma (Master + Slaves) when B3-
01=0. The only effect of this setting is on the scaling of AC IN Current Limit (B2-05). If
B3-01=0, one must divide the available AC current by the number of Combi-Gamma
(Master + Slaves) and set the limit accordingly. So an example of setting the B2-05-
=10A in a parallel system with 3 Combi-Gamma would result in a limit of 3*10A=30A
If however in this system the number of slaves is set to 2 (B3-01=2), then the division is •
done internally and the setting of the AC IN Current Limit to 10A (B2-05=10) will result
in 10A for the whole system and this is shared by the Master and Slaves. This system
is often applied when the AC IN power is limited for example by a generator of small
capacity.
B4 Group (2-3 Phase)
B4-01: 2-3 Phase Connection
All the Combi-Gamma in a multi-phase system must have 2-3 phase enabled. Use this •
setting to perform this function.
If more Combi-Gamma per phase are connected in parallel, then only the masters of the •
parallel system must have 2-3 phase enabled.
Setting Function
B4-01=0
(Initial setting)
2-3 Phase connection disabled.
B4-01=1 2-3 Phase connection enabled.
B4-02: 2-3 Phase Master
In a multi-phase system, there is always one (and only one) master. The Combi-Gamma •
at the other phases are called slaves.
Use this setting to designate one of the Combi-Gamma as the master.•
If this parameter is set (B4-02=0), the Combi-Gamma becomes a slave.•
Setting Function
B4-02=0
(Initial setting)
2-3 Phase system. This setting for Slave
B4-02=1 2-3 Phase system. This setting for Master
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vetus COMBI1524 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vetus COMBI1524 in the language / languages: English as an attachment in your email.

The manual is 4,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vetus COMBI1524

Vetus COMBI1524 Usermanual and installation guide - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info