474305
23
Zoom out
Zoom in
Previous page
1/26
Next page
21
EN
INSTALLATION TESTS
Once installation is completed, the computer should be tested to make sure it is working properly.
To Test Sensor/Transmitter Installation (HD/WL models):
1. Advance the computer to the RT/TT Mode by using Button
2
.
2. Make sure the RT/TT timers are running, or reset to zero by press & hold Button
3
.
3.
Advance the computer to the SPD/DST Mode by using Button
2
.
4. Pick up the front of the bicycle and spin the front wheel. The computer should display a speed-reading within 2-3 seconds.
If there is no speed reading, check the alignment and spacing between the magnet and sensor/transmitter and make sure that
the head unit is completely snapped into position. If these checks do not solve the problem, talk to an Authorized Vetta’s Retailer
or connect to www.vetta.com.
To Test Torpedo Installation (T2X models):
1. Advance the computer to the RT/TT Mode by using Button
2
.
2. Make sure the RT/TT timers are running, or reset to zero by press & hold Button
3
.
3. Advance the computer to the SPD/CAD Mode using Button
2
.
4. Ride the bicycle a short distance, after a few revolutions, a speed-reading and a cadence reading should appear on the
display. If there is no speed or cadence reading, check the alignment and spacing between the magnets and Torpedo.
Important
Make sure the magnets locking screw and all Zip-Ties are properly tightened.
Tips: Rotating the angle of the transmitters or the handlebar receiver (slightly), can sometimes improve the signals being
sent and received. Some bicycles have unusual frame tubes and angles, so by adjusting the components, can aid in
trouble shooting by aligning the misdirected signals.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VETTA VL110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VETTA VL110 in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of VETTA VL110

VETTA VL110 User Manual - Dutch - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info