Manual Vertex Standard VX-924 (page 20 of 40) (English)

574307

Zoom out

Zoom in

1/40

VX-920 SerieS Operating Manual

If a Speaker/Microphone is available, remove the

plastic cap and its two mounting screws from the

right side of the transceiver, then align the connec-

tor of the Speaker/Microphone on the transceiver

body; secure the connector pin

using the screws supplied with

the Speaker/Microphone. Hold

the speaker grille up next to

your ear while receiving. To

transmit, press the

PTT

switch

on the Speaker/Microphone,

just as you would on the main

transceiver’s body, and speak

into the microphone on a nor-

mal voice level.

Note 1): Save the original plastic cap and

its mounting screws. They should be rein-

stalled when not using the Speaker/Microphone.

2) When you press the PTT switch on the Speak-

er/Microphone, it disables the internal micro-

phone, and vice versa.

Do not remove/install the Speaker/Microphone

in a hazardous location.

If the Busy Channel Lockout feature has been pro-

grammed on a channel, the radio will not trans-

mit when a carrier is present. Instead, the radio

will generate short beep three times and indicate

“

CH Busy

” on the display (16-key and

4-key versions). Release the

PTT

switch and wait

for the channel to be clear of activity.

If CTCSS or Digital Coded Squelch (DCS) Lock-

out has been programmed on a channel, the radio

can transmit only when there is no carrier being

received or when the carrier being received in-

cludes the correct CTCSS tone or DCS code.

Automatic Time-Out Timer

If the selected channel has been programmed for au-

tomatic time-out, you must limit the length of each

transmission. While transmitting, a beep will sound

10 seconds before time-out. Another beep will sound

just before the deadline; the “

” indicator will dis-

appear and transmission will cease soon thereafter. To

resume transmitting, you must release the

PTT

switch

and wait for the “Penalty timer” to expire.

operation

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vertex Standard VX-924 in the language / languages: English as an attachment in your email.

The manual is 1,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vertex Standard VX-924 Manual

Product: