Manual Vertex Standard VX-459 (page 20 of 44) (English)

574304

Zoom out

Zoom in

1/44

VX-450 SerieS Operating Manual

operatIon

To transmit, monitor the

channel and make sure it

is clear.

Press and hold the

PTT

switch. Speak into the

microphone area of the

front panel grille in a normal voice level. To re-

turn to the Receive mode, release the

PTT

switch.

Press the (Orange)

TOP

SEL

key to activate one

of the preprogrammed

functions which may

have been enabled at the

time of programming by

the dealer. See the next section for details regard-

ing the available features.

If a Speaker/Microphone

is available, remove the

plastic cap and its two

mounting screws from

the r i g h t sid e o f t he

transceiver, then align

the c o n n e c t o r o f the

Speaker/Microp ho ne

on the transceiver body; secure the connector pin

using the screws supplied with the Speaker/Mi-

crophone. Hold the speaker grille up next to your

ear while receiving. To transmit, press the

PTT

switch on the Speaker/Microphone, just as you

would on the main transceiver’s body, and speak

into the microphone on a normal voice level.

Note 1): Save the original plastic cap and its

mounting screws. They should be reinstalled

when not using the Speaker/Microphone.

2) When you press the PTT switch on the Speak-

er/Microphone, it disables the internal micro-

phone, and vice versa.

If the Busy Channel Lockout feature has been

programmed on a channel, the radio will not

transmit when a carrier is present. Instead, the

radio will generate short beep three times and

indicate “

CH BUSY

” on the display (

VX-454

and

VX-459

). Release the

PTT

switch and wait for

the channel to be clear of activity.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vertex Standard VX-459 in the language / languages: English as an attachment in your email.

The manual is 2,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vertex Standard VX-459 Manual

Product: