574301

Vertex Standard VX-450 Series Manual

34
Zoom out
Zoom in
Previous page
1/44
Next page
VX-450 SerieS Operating Manual
32
dtmf code set
(
Vx-459 only
)
You may send the desired telephone number manu-
ally.
To dial a number manually, press (or press and hold)
the assigned Programmable key, then press the de-
sired numbers on the front panel’s numeric key. Now,
press the
PTT
switch to send the telephone number.
The DTMF tones sent during the dialing sequence
will be heard in the speaker.
call
When using the DTMF Paging System
This feature, if enabled, allows the user to change the
3-digit Page Call code, used to call other similarly-
equipped stations. Press (or press and hold) the as-
signed programmable key, followed by the three digits
representing the Page Call code of the station you wish
to call. Three tones will be heard after the last key is
pressed (the new code will now be transmitted).
The receiver squelch of the other station will be
opened, and you can begin communication.
When using the 2-tone/5-tone Signaling System
This feature, if enabled, press (or press and hold) the
assigned programmable key to send a 2-tone/5-tone
sequential tone.
When using the MDC1200 System
This feature, if enabled, press (or press and hold) the
assigned programmable key to send an MDC1200
code.
r
Press (or press and hold) the assigned program-
mable key to enter the “Call Menu” mode.
r
Press the
SIDE-1
/
SIDE-2
to select the desired
Call mode, then press the
[
D
]
key to accept the
selection. You may cancel the selection by press-
ing the
[
C
]
key.
r
Press the
SIDE-1
/
SIDE-2
to select the station to
be called.
You may enter the station’s ID number (four dig-
its) directly from the 16-Button DTMF keypad
(
[
0
] - [
9
]
,
[
A
]
-
[
D
]
,
[
#
]
: substitute for “E”, and
[
]
: wild card), if your transceiver is
VX-459
.
r
Press the
PTT
switch to send an MDC1200 call.
adVanced operatIon
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vertex Standard VX-450 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vertex Standard VX-450 Series in the language / languages: English as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info