Manual Vertex Standard VX-450 Series (page 18 of 44) (English)

574301

Zoom out

Zoom in

1/44

VX-450 SerieS Operating Manual

operatIon

Operation Quick Start

Tur n the top p a n e l ’s

VOL/PWR

knob clock-

wise to turn the radio

on.

Turn the top panel’s

Selector knob to choose

the desired operating

channel. On the

VX-454

and

VX-459

, a channel

name will appear on the

LCD.

If you want to select the operating channel from a

different Channel Group, press the Programmable

key (assigned to the Group Up or Down function)

to select the Channel Group you want before se-

lecting the operating channel. A Group name will

appear on the LCD whenever the Programmable

key is pressed.

Note: Some models are programmed so that the

operating channels are selected by the Program-

mable key and the Channel Group is selected by

Preliminary Steps

Install a charged battery

pack onto the transceiver,

as described previously.

Screw the supplied antenna

onto the Antenna jack.

Never attempt to operate

this transceiver without an

antenna connected.

If you have a Speaker/Mi-

crophone, we recommend that it not be connected

until you are familiar with the basic operation of

the

VX-450

Series.

IMPORTANT NOTE

Water resistance of the transceiver (IP57: 1

meter / 30 minutes) is assured only when the

following conditions:

Battery pack is attached to the transceiver;

Antenna is connected to the antenna jack;

r

and

MIC/SP

cap is installed in the

MIC/

jack.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vertex Standard VX-450 Series in the language / languages: English as an attachment in your email.

The manual is 2,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vertex Standard VX-450 Series Manual

Product: