574311
32
Zoom out
Zoom in
Previous page
1/52
Next page
EVX-530 SEriES OpErating Manual
30
scan set
Press, (or press and hold), the assigned
PF
key to add/
delete the current channel to/from your scanning list.
To store a particular channel to your scanning list,
press, (or press and hold), the assigned
PF
key. If you
delete a channel from your scanning list, press, (or
press and hold), the assigned
PF
key again.
When the scanner is paused, you may remove the
channel from the scan list temporarily by pressing, (or
press and holding), the same key.
In the
EVX-534/-539
, 1) when store a particular
channel to your scanning list, the display indicates
SCN SETbriey and icon will appear on the
display. 2) when delete a channel from your scanning
list, the display indicates SCN SKIP” briey and the
” icon will disappear from the display.
group scan set
You may wish to have the Scanner pass through more
than one Group during the scanning process (normally,
scanning is performed within the current group only).
To include the current Group in the scanning loop,
press, (or press and hold), the assigned
PF
key. To
remove a current Group from Group Scan, press, (or
press and hold), the assigned
PF
key again.
In the
EVX-534/-539
, 1) when include the current
group in the scan loop, the
” icon will appear on the
display. 2) when remove a current group from group
scan, the “
” icon will disappear from the display.
ta scan
Press, (or press and hold), the assigned
PF
key to
toggle the TA (Talk Around) scan feature “On” and
“Off”.
While TA scan is proceeding, the transceiver will
search both the transmit and receive frequencies (the
icon will blink on the display). When a signal is
encountered on the receive frequency, the transceiver
will pause until the signal disappears (the icon
will appear but not blink on the display). When a
signal is encountered on the transmit frequency, the
transceiver will check for activity on the receive fre-
quency every few seconds (interval programmed by
your Vertex Standard dealer).
Note: The TA Scan feature does not activate on the
Simplex Channel.
adVanced operatIon
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vertex Standard EVX-539 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vertex Standard EVX-539 in the language / languages: English as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info