574311

Vertex Standard EVX-539 Manual

26
Zoom out
Zoom in
Previous page
1/52
Next page
EVX-530 SEriES OpErating Manual
24
adVanced operatIon
r
Press the
SIDE-1
/
SIDE-2
buttons (or
[
A
]
/
[
B
]
keys) to select the desired squelch level. Available
selections are “SQLLV OP (Open)”, “SQLLV
TH (Threshold)”, “SQLLV NM (Normal)” and
“SQLLV TI (Tight)”.
r
Press the
[
D
]
key to store the new setting. The
display indicates “- SET -” briey, then reverts to
the normal channel indication.
You may cancel the new setting by pressing the
[
C
]
key. In this case, the display indicates “-
CANCEL -” briey.
Beep off
Press, (or press and hold), the assigned
PF
key to
disable the radio beeps temporarily. Press again, (or
press and hold again), the assigned
PF
key to enable
the radio beeps.
In the
EVX-534/-539
, when the Beep Off function is
“on” and “off”, the display indicates briey “BEEP
OFF” and “BEEP ON”.
Note: if the Channel Announcement feature is acti-
vated on the
EVX-534/-539
, the Channel Announce-
ment also disables and enables when the Beep Off
function is “on” and “off”.
af mInImum Volume
(
eVx-534 & eVx-539
)
Press, (or press and hold), the assigned
PF
key, the
display indicates “AFATT ON” briefly, and reduce
the audio output to the (lower) level programmed.
Again press, (or press and hold), the assigned
PF
key,
the display indicates “AFATT OF” briefly, and re-
sume normal audio output level. You may change the
programmed (lower) level by the “User Set (Menu)”
mode. See page 33 for more information.
ch announcement
Press, (or press and hold), the assigned
PF
key to se-
lect the channel change conrmation between “beep”
(In the
EVX-534/-539
, indicates “BEEP” briefly)
and “announcement” (In the
EVX-534/-539
, indi-
cates “ANNOUNCE” briey).
WhIsper
Press, (or press and hold), the assigned
PF
key to
increase the microphone gain; thus you can speak in
a low voice (whisper) temporarily. Press again, (or
press and hold again), the assigned
PF
key to resume
normal microphone gain.
In the
EVX-534/-539
, when the Whisper function is
“on” and “off”, the display indicates “WHISP ON”
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vertex Standard EVX-539 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vertex Standard EVX-539 in the language / languages: English as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info