574308

Vertex Standard EVX-530 Series Manual

3
Zoom out
Zoom in
Previous page
1/52
Next page
EVX-530 SEriES OpErating Manual 1
Important Notice for North American Users Regarding 406 MHz Guard Band
The U.S. Coast Guard and National Oceanographic and Atmospheric Administration have requested the
cooperation of the U.S. Federal Communications Commission in preserving the integrity of the protected
frequency range 406.0 to 406.1 MHz, which is reserved for use by distress beacons. Do not attempt to pro-
gram this apparatus, under any circumstances, for operation in the frequency range 406.0 - 406.1 MHz if
the apparatus is to be used in or near North America.
Warning - Frequency band 406 - 406.1 MHz is reserved for use ONLY as a distress beacon by the US Coast
Guard and NOAA. Under no circumstance should this frequency band be part of the pre programmed oper-
ating frequencies of this radio.
IntroductIon
The
EVX-530
series are full-featured Hand-Held Digital/Analog Transceiver designed for business communica-
tions in the VHF/UHF Land Mobile bands. These transceivers are designed for reliable business communications in
a wide variety of applications with a wide range of operating capability provided by their leading-edge design.
The
EVX-531
allows up to 32-channel capacity within a maximum 2 groups. The
EVX-534/-539
allows up to
512-channel capacity within a maximum 32 groups which can each be programmed with an 8-character Alpha-
Numeric Tag.
Important channel frequency data is stored in the ash memory, and is easily programmable by a Vertex Standard
licensed dealers using a personal computer with Vertex Standard Programming equipment:
FIF-12
USB Program-
ming Interface, and
CT-106
Connection cable with
CE142
Software. Or, once a single radio is programmed, clon-
ing cable
CT-27
can be used to program additional radios directly.
The pages which follow will detail the many advanced features provided in the
EVX-530
series transceiver. After
reading this manual, you may wish to consult with your Network Administrator regarding precise details of the
conguration of this equipment for use in your application.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vertex Standard EVX-530 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vertex Standard EVX-530 Series in the language / languages: English as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info