815508
35
Zoom out
Zoom in
Previous page
1/54
Next page
3535 3-90-30007467Vermont Castings • Stardance SDDVT Installation Manual_R35 • 11/23
4. An IFT-ECM reset is required if the module is in a lock-out
condition. When this occurs, the appliance is shut down
and the IFT-ECM status indicator LED will be blinking a
RED/GREEN error code along with a one-time audible
double- beep. If the IFT-ECM is in a lock-out condition,
refer to the troubleshooting chart to interpret the error
code and take corrective action as required. To reset the
IFT-ECM after a lock-out error:
CAUTION! Risk of burns! Appliance surfaces are hot
when operating and during cool down. Use care and wear
gloves when opening the front and accessing components
inside the appliance.
- Be aware the appliance may be HOT, use care in
accessing the IFT-ECM.
- Set the IFT-ECM 3-position selector switch to OFF
position.
- Wait ve (5) minutes to allow possible accumulated
gas to clear.
- Set the IFT-ECM 3-position selector switch to ON or
REMOTE position. Module will beep once and ash a
three GREEN LED code on successful startup.
- If placed in ON position, the appliance will ignite
normally if the error condition was corrected.
- If placed in REMOTE position, use the paired IFT-
RC400 or wired wall switch to start the appliance;
appliance will ignite normally if the error condition
was corrected.
- If the IFT-ECM re-enters the lock-out condition after
these steps, call your dealer for service.
IntelliFireTM Touch Ignition System
NOTICE: Batteries should not be placed in the battery
pack while using the transformer. Remove batteries before
using the transformer, and unplug the transformer before
installing the batteries. Battery polarity must be correct or
module damage will occur.
ApplianceON/OFF:
This model is supplied with a fully functional remote control.
This remote controls:
ON/OFF Functions
Flame height adjustments
Thermostat
Cold Climate Feature
Fan Speed
Please refer to the instructions included with the remote
control for more detailed operating instructions.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vermont Castings Stardance Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vermont Castings Stardance Series in the language / languages: English as an attachment in your email.

The manual is 7.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vermont Castings Stardance Series

Vermont Castings Stardance Series User Manual - French - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info