815501

Vermont Castings Encore Manual

21
Zoom out
Zoom in
Previous page
1/30
Next page
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/23 18390-204C
Owner’s Manual
Operation & Care
INSTALLER: Leave this manual with party responsible for use and operation.
OWNER: Retain this manual for future reference.
Contact your dealer with questions on installation, operation, or service.
NOTE
To obtain a French translation of this manual, please
contact your dealer or visit www.vermontcastings.com
Pour obtenir une traduction française de ce manuel, s’il
vous plaît contacter votre revendeur ou visitez www.
vermontcastings.com
If the information in these instructions is not
followed exactly, a re may result causing
property damage, personal injury, or death.
WARNING
!
• Donotstoreorusegasolineorotherammablevapors
and liquids in the vicinity of this or any other appliance.
• Donotoverre-Ifapplianceorchimneyconnector
glows,you are overring.Over ring will void your
warranty.
• Comply with all minimum clearances to combustibles
asspecied.Failuretocomplymaycausehousere.
Installationandserviceofthisapplianceshouldbeperformedby
qualiedpersonnel.Hearth&HomeTechnologiesrecommends
HHTFactoryTrainedorNFIcertiedprofessionals.
HOT SURFACES!
Glass and other surfaces are hot
duringoperationANDcooldown.
Hot glass will cause burns.
WARNING
!
• Do not touch glass until it is cooled
• NEVERallowchildrentotouchglass
• Keep children away
• CAREFULLYSUPERVISEchildreninsameroomas
replace.
• Alert children and adults to hazards of high
temperatures
• High temperatures may ignite clothing or other
ammable materials.
• Keep clothing, furniture, draperies and other
ammablematerialsaway.
2425
Encore NC Cover
5/05
For use in the
UnitedStatesandCanada
Encore® Model 2040-CAT-C
Wood Burning Stove
NOTICE: SAVE THESE INSTRUCTIONS
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/2328390-204C
CongratulationsonyourchoiceofaVermontCastingsEncore®Model2040-CAT-CWoodBurningStove.AtVermontCastings
wetakeAmericancraftsmanshipseriously.Weassureyouthatyourcast-ironVermontCastingsstovehasbeenmadewith
the utmost care and will provide you with many years of service.
Asyoubecomeacquaintedwithyournewstove,youwillndthatitsappearanceismatchedbyitsfunctionality,duetocast
iron’s unique ability to absorb and radiate heat.
Also,VermontCastingsproductsareamongthecleanest-burningwoodstovesavailabletoday.However,cleanburning
depends on both the manufacturer and the operator. Please read this manual carefully to understand how to properly operate
and maintain your stove.
AtVermontCastings,wearecommittedtoyoursatisfactionasacustomer.Thatiswhywemaintainanexclusivenetworkof
thenestdealersintheindustry.Ourdealersarechosenfortheirexpertiseanddedicationtocustomerservice.Feelfreeto
contactyourAuthorizedVermontCastingsDealeranytimeyouhaveaparticularquestionaboutyourstoveoritsperformance.
ThismanualcontainsvaluableinstructionsontheoperationofyourVermontCastingsEncore®Model2040-CAT-CWood
BurningStove.Italsocontainsusefulinformationonmaintenance.Pleasereadthemanualthoroughlyandkeepitasa
reference.
Note: Cast iron is an artisan crafted material, which is made the same way today as nearly 2000 years ago. Due to
the intrinsic primitive nature of the casting process, part to part variation is normal and adds to the character of a
hand built cast iron appliance.
Thisheatermeets the U.S. Environmental Protection
Agency’s emission limits for wood heaters sold on or after
May15,2020.
Please read this entire manual before you operate your new
stove. Failure to follow instructions may result in property
damage, bodily injury, or even death.
Proposition 65 Warning: Fuels used in gas, wood
burning or oil fired appliances, and the products of
combustion of such fuels, contain chemicals known to
theStateofCaliforniatocausecancer,birthdefectsand
other reproductive harm.
CaliforniaHealth&SafetyCodeSec.25249.6
LABELTICKET
ECO: 97657 LABEL SIZE: 6.5”Hx13.5”W
PART # / REV: 8390-038B ADHESIVE:
ORIGINATOR: Spidlet MATERIAL: 24GaugeAluminum
DATE: 09/12/22 INK: BlackBackgroundAluminumLettering
(4)SlottedHoles=.156x.25
(1)RoundHole=.630
(1)RoundHole=.140
(4)Corners=R.062
Barcodelabelmusthavetheserialnumberonit.The
barcodelabelmustbeabletoreadCode39FullASCII.
352MountainHouseRoad
Halifax,PA17032
8390-038B
U.S. ENVIRONMENTAL PROTECTION AGENCY Export
Stove. May not be sold or operated within the United States.
MODEL / MAQUETTE / MODELL: “Intrepid® Flexburn”
LISTED SOLID FUEL ROOM HEATER BURNING FIREPLACE STOVE
HOMOLOGUE POELE A COMBUSTIBLE SOLIDES
Made in U.S.A. of US and imported parts. / Fabriqué aux États-Unis-
d’Amérique par des pièces d’origine américaine et pièces importées.
BARCODE LABEL
BARCODE LABEL
HF
Serial No.
Numéro de série.
Seriennummer.:
Date of Manufacture / Date de fabrication:
2022 2023 2024 JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC
Manufactured by / Fabriqué par: Hearth and Home Technologies 352 Mountain House Road, Halifax PA 17032
Europe
Nominalheatoutput: 4,9kW
COemission(at13%O2): 0,08%
E󰀩ciency 80,2%
Fluegastemperature: 243°C
DustCOemission(at13%O2): 17,1mg/NM3
FuelType: Wood
Safetyclearancedistance(back): 300mm
Safetyclearancedistance(side): 300mm
OperationType: Intermittent
Country Classi cation Standards Approved By Report #
Europe(Emissions) Intermittent EN13240:2001,EN13240/A2:2004,EN16510-1 CTIFNo1677 4883P
Europe(Safety) EN13240:2001,EN13240/A2:2005 CTIFNo.1677 4889
Japan ASTME2515,ASTME2780,UL1482-2011,ULC-S627-00,CAN/CSAB415.1 OmniTestLaboratories 0135WS038E&0135WS038S
Europe - French
Puissancecaloriquenominale: 4,9kW
ÉmissiondeCO(à13%O2): 0,08%
E󰀩cacité: 80,2%
Températuredesfumées: 243°C
ÉmissiondepoussièresdeCO(à13%d’O2): 17,1mg/NM3
Typedecarburant: Wood
Distancedesécurité(arrière): 300mm
Distancedesécurité(côté): 300mm
Typed’opération: Intermittent
Europe - Flemmish
Nennwärmeleistung: 4,9kW
CO-Emission(bei13%O2): 0,08%
E󰀩zienz: 80,2%
Abgastemperatur: 243°C
Staub-CO-Emission(bei13%O2): 17,1mg/NM3
Treibsto󰀨art: Wood
Sicherheitsabstand(hinten): 300mm
Sicherheitsabstand(seitlich): 300mm
Operationstyp: Intermittent
Japan
Nominalheatoutput: 4,9kW
COemission(at13%O2): 0,08%
E󰀩ciency: 80,2%
Fluegastemperature: 243°C
DustCOemission(at13%O2): 17,1mg/NM3
FuelType: Wood
Safetyclearancedistance(back): 300mm
Safetyclearancedistance(side): 300mm
OperationType: Intermittent
SerialNo.
SAMPLE
ModelName
Mfg.Date
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/23 38390-204C
TABLE OF CONTENTS
Safety Alert Key:
• DANGER! Indicatesahazardoussituationwhich,ifnotavoidedwill result in death or serious injury.
• WARNING!Indicatesahazardoussituationwhich,ifnotavoidedcould result in death or serious injury.
• CAUTION! Indicatesahazardoussituationwhich,ifnotavoided,could result in minor or moderate injury.
• NOTICE:Indicatespracticeswhichmaycausedamagetotheapplianceortoproperty.
!
A. WarrantyPolicy ........................................................ 4
1 Product Listing and Important Safety Information
A. ApplianceCertication ............................................. 6
B. BTU&E󰀩ciencySpecications ............................... 6
C. California .................................................................. 6
D. MobileHomeApproved ...........................................6
E. GlassSpecications ................................................ 6
2 Operating Instructions
A. Appliance Controls ................................................... 8
B. ConditioningYourStove .......................................... 9
C. WoodBurningOperation .........................................9
D. WaystoAddFuel .....................................................9
E.AshDisposal ............................................................13
F. Opacity(VisibleSmoke) ..........................................14
G. NegativePressure ................................................... 14
H. ImportantInformation ............................................... 15
3 Maintenance
A. CleaningandReplacementofGlass ....................... 16
B. DamperAdjustment ................................................. 17
C. DoorLatchAdjustment ............................................ 17
D. Ash Door Adjustment ............................................... 17
E. GasketReplacement ............................................... 17
F. TheChimneySystem .............................................. 18
G. TheCatalyticElement .............................................. 19
4 Troubleshooting Guide ............................................ 21
5 Reference Material
A. Service&MaintenanceLog ..................................... 22
B. ServiceParts&Accessories .................................... 23
C. ContactInformation ................................................. 30
= Contains updated information
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/2348390-204C
Hearth & Home Technologies LLC
LIMITED LIFETIME WARRANTY
Hearth & Home Technologies LLC (“HHT”) extends the following warranty for HHT gas, wood, pellet and electric hearth appliances
(each a “Product” and collecvely, the “Product(s)”) and certain component parts set forth in the table below (“Component Part(s)”)
that are purchased from a HHT authorized dealer or distributor.
WARRANTY COVERAGE:
HHT warrants that the Products and their Component Parts will be free from defects in materials and workmanship for the applicable
period of Warranty coverage set forth in the table below (“Warranty Period”). If a Product or Component Parts are found to be
defecve in materials or workmanship during the applicable Warranty Period, HHT will, at its opon, repair the applicable Component
Part(s), replace the applicable Component Part(s), or refund the purchase price of the applicable Product(s). The maximum amount
recoverable under this Warranty is limited to the purchase price of the Product. This Warranty is transferable from the original purchaser
to subsequent owners, but the Warranty Period will not be extended in duraon or expanded in coverage for any such transfer. This
Warranty is subject to condions, exclusions, and limitaons as described below.
WARRANTY PERIOD:
Warranty coverage begins at the date of installaon. In the case of new home construcons, Warranty coverage begins on the date of
rst occupancy of the dwelling or six months aer the sale of the Product(s) by an independent, authorized HHT dealer or distributor,
whichever occurs earlier. However, the Warranty coverage shall commence no later than 24 months following the date of Product
shipment from HHT, regardless of the installaon or occupancy date.
The term “Lifeme” in the table below is dened as: 20 years from the beginning date of warranty coverage for gas appliances, 10 years
from the beginning date of warranty coverage for wood and pellet appliances, and 5 years from the beginning of warranty coverage
for standalone gas log sets. These me periods reect the minimum expected useful lives of the designated Component Parts under
normal operang condions.
Page 1 of 2
4021-645M 9/21
Component
Parts Labor Gas Pellet Wood Electric Venting Component Parts Covered by this Warranty
XAll parts except as covered by Warranty Conditions,
Warranty Exclusions, and Warranty Limitations listed
X X Igniters, Auger Motors, Electronic Components, and
Glass
X
Electrical components limited to modules, remotes/wall
switches, valves, pilots, blowers, junction boxes, wire
harnesses, transformers and lights (excluding light bulbs)
X X Molded Refractory Panels, Glass Liners
X
Burners and logs for standalone gas log sets
(Vented and Vent Free gas log sets not sold as
components of the fireplace or stove)
X
Vent Free Burners and Vent Free Log components of
HHT manufactured fireplaces or stoves
X X Castings, Medallions and Baffles
6 years 3 years XCatalysts
7 years 3 years X X Manifold tubes, HHT Chimney and Terminations
10 years 1 year X
Burners, logs and refractory components of HHT
manufactured fireplaces or stoves
Limited
Lifetime 3 years XXX Firebox and heat exchanger, FlexBurn® System
(engine, inner cover, access cover and fireback)
1 Year None XXXXX All purchased replacement parts
Warranty Period HHT Manufactured Appliances and Venting
All parts including handles, external enameled
components and other material except as covered by
Warranty Conditions, Warranty Exclusions, and
Warranty Limitations listed
2 years
X
1 Year X X X
2 Years
5 years 1 year
Firepots, burnpots, mechanical feeders/auger
assemblies
3 years X
5 years
A. Warranty Policy
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/23 58390-204C
WARRANTY CONDITIONS:
•
Because HHT cannot control the quality of any Products sold by unauthorized sellers, this Warranty only covers Products that are
purchased through an HHT authorized dealer or distributor unless otherwise prohibited by law; a list of HHT authorized dealers
is available on the HHT branded websites.
• This Warranty is only valid while the applicable Product remains at the site of original installaon.
• This Warranty is only valid in the country in which the HHT authorized dealer or distributor that sold the applicable Product is
authorized to sell applicable Product.
• Contact your installing distributor or dealer for Warranty service. If the installing dealer or distributor is unable to provide
necessary parts, contact the nearest HHT authorized dealer or supplier. Addional service fees may apply if you are seeking
Warranty service from a dealer other than the dealer from whom you originally purchased the applicable Product.
• No HHT consumer should bear cost of warranty service or costs incurred while servicing warranty claims (i.e., travel, gas, or
mileage) when the service is performed within the terms of this Warranty. Check with your dealer or distributor in advance for
any costs to you when arranging a warranty call. Travel and shipping charges for parts are not covered by this Warranty.
WARRANTY EXCLUSIONS:
This Warranty does not cover the following:
•
Changes in surface nishes as a result of normal use. As a heang appliance, some changes in color of interior and exterior surface
nishes may occur. This is not a aw and is not covered under the Warranty.
• Damage to printed, plated, or enameled surfaces caused by ngerprints, accidents, misuse, scratches, melted items or other
external sources and residues le on the plated surfaces from the use of abrasive cleaners or polishes.
• Repair or replacement of parts that are subject to normal wear and tear during the Warranty Period are not covered. These parts
include: paint, wood and pellet gaskets, rebricks, grates, ame guides, baeries and the discoloraon of glass.
•
Minor expansion, contracon, or movement of certain parts causing noise. These condions are normal and complaints related to
this noise are not covered by this Warranty.
• Damages resulng from: (1) failure to install, operate, or maintain the applicable Product in accordance with the installaon
instrucons, operang instrucons, and lisng agent idencaon label furnished with the applicable Product; (2) failure to
install the applicable Product in accordance with local building codes; (3) shipping or improper handling; (4) improper operaon,
abuse, misuse, connued operaon with damaged, corroded or failed components, accident, or improperly/incorrectly performed
repairs; (5) environmental condions, inadequate venlaon, negave pressure, or draing caused by ghtly sealed construcons,
insucient make-up air supply, or handling devices such as exhaust fans or forced air furnaces or other such causes; (6) use of fuels
other than those specied in the operaon instrucons; (7) installaon or use of components not supplied with the applicable
Product or any other components not expressly authorized and approved by HHT; (8) modicaon of the appliance not expressly
authorized and approved by HHT in wring; and/or (9) interrupons or uctuaons of electrical power supply to the applicable
Product.
• Non-HHT venng components, hearth connecons or other accessories used in conjuncon with the applicable Product.
• Any part of a pre-exisng replace system in which an insert or a decorave gas applicable Product is installed.
•
HHT’s obligaon under this Warranty does not extend to the Product’s capability to heat the desired space. Informaon is provided
to assist the consumer and the dealer in selecng the proper Product for the applicaon. Consideraon must be given to the
Product locaon and conguraon, environmental condions, insulaon and air ghtness of the structure.
This warranty is void if:
• The applicable Product has been over-red, operated in atmospheres contaminated by chlorine, uorine, or other damaging
chemicals. Over-ring can be idened by, but not limited to, warped plates or tubes, deformaon/warping of interior cast iron
structure or components, rust colored cast iron, bubbling, cracking and discoloraon of steel or enamel nishes.
• The applicable Product is subjected to prolonged periods of dampness or condensaon.
•
There is any damage to the applicable Product due to water or weather damage which is the result of, but not limited to, improper
chimney or venng installaon.
LIMITATIONS OF REMEDIES AND LIABILITY:
•
EXCEPT TO THE EXTENT PROVIDED BY LAW, HHT MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY SPECIFIED
HEREIN. The owner’s exclusive remedy and HHT’s sole obligaon under this Warranty or in contract, tort or otherwise, shall be
limited to replacement of the Component Part(s), repair of the Component Part(s), or refund of the original purchase price of the
applicable Product(s), as specied above; provided, however, that (i) if HHT is unable to provide replacement of the Component
Part(s) and repair of the Component Part(s) is not commercially praccable or cannot be mely made, or (ii) the customer is
willing to accept a refund of the purchase price of the applicable Product(s), HHT may discharge all such obligaons by refunding
the purchase price of the applicable Product. In no event will HHT be liable for any incidental or consequenal damages caused
by defects in the applicable Product. Some States do not allow the exclusion or limitaon of incidental or consequenal damages,
so the above limitaon or exclusion may not apply to you. This Warranty gives you specic legal rights and you may also have
other rights which vary from State to State. THE DURATION OF ANY IMPLIED WARRANTY IS LIMITED TO DURATION OF THE
EXPRESSED WARRANTY SPECIFIED ABOVE FOR THE APPLICABLE PRODUCT. Some States do not allow limitaons on how long an
implied warranty lasts, so the above limitaon may not apply to you.
Page 2 of 2
4021-645M 9/21
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/23 68390-204C
1 1 Product Listing and Important Safety Information
A. Appliance Certication
D. Mobile Home Approved (USA & Canada)
• This appliance is approved for mobile home installations
intheUSA&Canadawhennotinstalledinasleeping
room and when an outside combustion air inlet is
provided.
• Thestructuralintegrityofthemobilehomeoor,ceiling,
and walls must be maintained.
• The appliance must be properly grounded to the frame
of the mobile home with #8 copper ground wire, and
chimneymustbelistedtoUL103HToralistedUL-1777
fulllengthsixinch(152mm)diameterlinermustbeused.
• Outside air must be provided in a mobile home
installation.
E. Glass Specications
This appliance is equipped with 5mm ceramic glass.
Replaceglassonlywith5mmceramicglass.Pleasecontact
your dealer for replacement glass.
!WARNING
This product and the fuels used to operate this product
(wood),andtheproductsofcombustionofsuchfuels,can
expose you to chemicals including carbon black, which
isknowntotheStateofCaliforniatocausecancer,and
carbonmonoxide,whichisknowtotheStateofCalifornia
to cause birth defects or other reproductive harm. For
moreinformationgoto:www.P65Warnings.ca.gov
C. California
The Vermont Castings Encore® Model
2040-CAT-CWoodAppliancemeetstheU.S.
EnvironmentalProtectionAgencyCertied
tocomplywiththe2020particulateemission
standards using cord wood.
B. BTU & E󰀩ciency Specications
EPA Certication Number: 164-18
Catalytic Information
EPA Certied Emissions: 1.1g/hr
*EPA Default LHV: 82.8%
**Actual tested HHV: 76.8%
***EPA BTU Output: 12,800-37,100
****Peak BTU/Hour Output: 48,000
Other Important Information
Vent Size: 6Inch(152mm)
8Inch(203mm)
Firebox Size: 2.3cu.ft.
Max. Wood Length: 22"Maximum
Ideal Wood Length: 18"(TopLoad)
Fuel SeasonedCordwood
(20%moisture)
MODEL: Encore®Model2040-CAT-C
LABORATORY: OMNITestLaboratories,Inc
REPORT NO. 0135WS042E&0135WS042S
TYPE: SolidFuelRoomHeater/Wood
BurningType
STANDARD(s): ASTME2515,ASTME2780,UL1482,
ULC-S627-00,CAN/CSAB415.1
ELECTRICAL
RATING: 115VAC,60Hz
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/23 78390-204C
NOTE:Hearth&HomeTechnologies,manufacturerofthis
appliance, reserves the right to alter its products, their
specicationsand/orpricewithoutnotice.
Improperinstallation, adjustment, alteration, service or
maintenance can cause injury or property damage.
Forassistanceoradditionalinformation,consultaqualied
installer, service agency or your dealer.
IntheUnitedStatesitisagainstthelawtooperatethiswood
heater in a manner inconsistent with the operating instructions
in this manual.
Vermont Castings is a registered trademark of Hearth &
HomeTechnologies.
• Installationanduseofanydamagedappliance.
• Modicationoftheappliance.
• InstallationotherthanasinstructedbyHearth&Home
Technologies.
• Installation and/or use of any component part not
approvedbyHearth&HomeTechnologies.
• Operatingappliancewithoutfully assembling all
components.
• Operatingappliancewithoutlegsattached(ifsupplied
withappliance).
• DoNOTOverre-Ifapplianceorchimneyconnector
glows,youareoverring.
Anysuchactionthatmaycausearehazard.
Fire Risk.
Hearth& Home Technologies disclaimsany
responsibility for, and the warranty will be voided
by,thefollowingactions:
WARNING
!
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/2388390-204C
2 2 Operating Instructions
A. Appliance Controls
TwocontrolsregulatetheperformanceoftheEncore®Model
2040-CAT-C:aprimary air control suppliesoxygenforthe
re,andadamperdirectsairowwithinthestovetoactivate
and deactivate the combustion system, Figure 2.1.
Symbolsonthestoveareremindersofthecorrectdirections
forusingthecontrols.Thewords‘Left’and‘Right’inthese
directions are facing the stove.
Figure 2.1 - The Encore® Model 2040-CAT-C controls are
conveniently located and easy to operate.
A Damper Directs Air Flow Within the Stove
The damper handle on the left side of the stove operates
thedampertodirectairowwithinthestove.
The damper is open when the handle points to the rear,
enabling smoke to pass directly into the chimney. The damper
mustbeopenwhenstartingorrevivingare,andwhenever
the griddle or doors are opened.
The damper is closed when the handle points down.Smoke
travels through the secondary combustion system where
it can be further burned, before passing up the chimney,
Figure2.3.
The damper should always be either fully open or fully
closed. There are no intermediate positions. When
closing the damper, be sure to pull rmly enough to snap
the handle into the locked position.
Thiswoodheaterhasamanufactured-setminimumlow
burnratethatmustnotbealtered.Itisagainstfederal
regulations to alter this setting or otherwise operate this
wood heater in a manner inconsistent with operating
instructions in this manual.
WARNING
!
A Single Air Control Regulates Heat Output and Burn Time
The primary air control lever, on the right of the stove,
controls the amount of incoming air for starting, maintaining,
andrevivingare.
Oncetheaircontrolismanuallyset,abi-metallicthermostat
automatically maintains the heat output at a constant level
for a more even heat over the life of the burn.
Moreairenteringthestovemakesthereburnhotterand
faster, while less air prolongs the burn at a lower heat output
level.
Forthegreatestairsupplyandmaximumheatoutput(but
theshortestburntime),movethelevertowardthefrontof
thestove.Forarethatwilllastlongerwithlessheat,move
the lever toward the rear of the unit, Figure 2.2.
GriddleHandle
DamperHandle
Primary Air
ControlLever
DoorHandleHolder
(Behindleg)
Ashdoor
Handle
Andirons
DoorHandle
ST637
encore
Air control
2/01
Low Heat
High Heat
Figure 2.2 - The handle may be positioned anywhere between the
twoextremesfordi󰀨erentheatlevels.
Damper Positions
ST638
Encore
damper control
2/01
Open
(UpdraftMode)
Closed
(HighE󰀩ciency
Mode)
Figure 2.3-Thedamperiseitheropenorclosed.Thereareno
intermediate positions.
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/23 98390-204C
B. Conditioning Your Stove
Castironisextremelystrong,butitcanbebrokenwitha
sharp blow from a hammer or from the thermal shock of
rapidandextremetemperaturechange.
The cast plates expand and contract with changes in
temperature. When you rst begin using your Encore®
Model2040-CAT-C,minimizethermalstressbylettingthe
platesadjustgraduallyduringthreeor fourinitialbreak-in
res.
C. Wood Burning Operation
Burn only solid wood in the Encore® Model 2040-CAT-C
WoodStove,andburnitdirectlyonthegrate.Donotelevate
thefuel.Donotburncoalorotherfuels.IntheUnitedStates,
it is against the law to operate this wood heater in a manner
inconsistent with operating instructions in this manual.
The bypass damper must be open when starting a re
or when refueling.
Do not use chemicals or uids to start the re. Do not
burn garbage. Never use ammable uids such as
gasoline, gasoline type lantern fuel, kerosene, charcoal
lighter uid, naptha, engine oil or similar liquids to
start or “freshen up” a re in this heater. Keep all such
liquids well away from the heater while it is in use.
The following procedures are important for reliable, clean
ande󰀩cientoperationofyourwoodstove.Recommend16”
logs Properly seasoned (up to a year for denser woods)
Splitto3”to6”crosssections
Cold start:
Whenstartingyourstoveatroomtemperatureandwhenno
burning coals are present the following kindling procedure
has been found to be the most reliable.
Stackabout4lbsofnelysplitkindling(1”diameterorless
10to20pcs)ina‘logcabin’styledirectlyagainsttherear
wall. Place a small amount of newspaper on top of this
pile with one or two small pieces of kindling on top. This
is referred to as a top down method and while providing a
slower start, also serves to preheat the combustion properly
resultinginareliablestart.,Figure2.4.
Withthebypassdamperopenandtheprimaryairsettoits
highestposition,lightthenewspaper.Leavethefrontdoor
cracked until the kindling ignites, then close the doors.
Aftermostofthekindlinghasburnedintocoals(15to20
minutes),openthe front doors and push remaining coals
and unburned wood against the rear wall. Add several
piecesoflargersplitwoodbetween2to3inchesindiameter
(about6lbs)directlyagainsttherearwallandontopofthe
kindling coals. Close the doors and bypass to engage the
combustion system. The air should remain on high for up
to one hour or until the wood is mostly converted to coals.
After a hot bed of coals is produced, open the door and
bypass damper and push the remaining coals again toward
the rear wall. Add large pieces of wood starting against
the rear wall and on top of the coals. Close the doors and
bypass immediately after loading the stove.
Ideally,allowthiswoodloadtoburnatthehighestairsetting
forthe entire wood load. If this is not possible, thewood
should burn for at least 30 minutes prior to reducing the
primary air setting.
D. Ways to Add Fuel
To open the front doors, insert the handle into the door latch
stubandturnitclockwise,Figure2.5.
To close them, always close the left door rst. Turn the
handle in the right door to the left and up (to the open
position)andcloseit.Finally,pushonthedoorasyouturn
the handle counterclockwise. The doors will draw in slightly,
andthehandleshouldo󰀨ersomeresistanceasyouturnit
to the closed position.
To reduce the risk of breaking the glass, avoid striking the
glass or slamming the doors.
When you are not using the door handle, store it in the
holder behind the left front leg of the stove.
WARNING
!
Fireplace stoves equipped with doors should be
operated only with doors fully open or doors fully
closed. If doors are left partly open, gas and ame may
be drawn out of the replace stove opening, creating
risks from both re and smoke.
ST263
starting a fire
12/99
Figure 2.4-Starttherewithnewspaperanddrykindling.
ST544
door open
11/00
Clockwise to
Open
Counterclockwise
to Close
Figure 2.5-Toopenthefrontdoors,turnthehandleclockwise.
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/2310 8390-204C
NOTE:Itwilltakeseveralminutesafterclosingthebypass
damper for the temperature probe to fully adjust to the new
temperature. If the probe indicator is below the operate
catalyst range, add fuel or open the bypass damper to allow
theretofurtherbuildbeforeengagingthecatalystagain.
Iftheprobeindicatorisabovetheoperatecatalystrange,
the catalytic combustor is running too hot and may be
damaged.Inmanycases,decreasingthe primaryaircan
reduce the catalyst temperature and adding less wood with
each loading can also help if overheating is persistent. Do
not add wood to the stove if the probe reads above the
operate catalyst range.
Avoidusingafullloadofverydrywoodintherebox,such
asdryslabwoodorwoodwithbelow14%moisturecontent.
This may result in continuous very high temperatures in the
secondary combustion area and damage the combustor.
Neverburntreatedwood,garbage,solventsortrash.Allof
these may poison the catalyst and prevent it from operating
properly.Neverburn cardboardorloosepaper exceptfor
kindlingpurposes.Neverburncoal;doingsocanproduce
soot or large akes of char or y ash that can coat the
combustor and cause smoke to spill into the room. Coal
smoke can also poison the catalyst so that it won’t operate
properly.
NOTE: The catalytic combustor is fragile and will crack if
subjected to thermal shock. Thermal shock can occur when
refueling with wet wood or closing the bypass damper too
early after refueling.
For best results when refueling, wear long-cu󰀨ed stove
gloves to protect your hands and forearms.
Reloading a hot stove:
Whenawoodloadisaddedtoahotbedofcoals(continuous
use),openthebypassdamperandeitherthetoporfront
loadingdoors.Stirthehotcoalstoallowashtofallthrough
thegrate.Hotcoalsshouldthenbepushedagainsttherear
wall and leveled depending on the amount of coals. Add
fresh wood and close the loading door and bypass damper.
Ifthecoalsareglowingandhot,itispossibletosettheair
control to any setting immediately after loading the stove.
Reloading a warm stove:
If the stove is relatively cold (for instance after a long
overnightburn),thecoalbedmayneedtobere-energized
priortoaddingalargeloadofwood.Openthebypassdamper
and either the top or front loading door. Stir the coals to
allow ash to fall through the grate. Push the remaining coals
towardtherearwall.Closethedoor(s)andbypassdamper
and set the primary air to the highest position. Allow the
coalstore-igniteandheatthesystemfor10to15minutes.
Oncethecoalsareglowing,afreshbatchofwoodmaybe
addedfollowingthe“hotstove”procedureabove.
A proper bed of coals is critical to the performance of the
Encorestove.Therearrefractorywallofthestoveshould
be almost entirely white in color with proper operation. This
indicates the combustion system is running at a proper
elevatedtemperature.Iftherearwallisblackwithcreosote
or develops a dark brown color, it is likely that the coal bed
isnotsu󰀩ciencylargeenoughorhotenough.Revisitthe
above instructions and adjust the amount of kindling or time
athighairsettingstogetthesystemhotter.Woodsizeor
excessive moisture may also cause lower than desirable
stove temperatures.
Whilenotrequired,operatingyourstovewiththecatalytic
combustor installed creates optimum conditions for
secondarycombustionandwillincreaseyoure󰀩ciencyup
to15%onlowburn,makingsureyougetthemostheatout
of each load of wood.
The catalytic element is a metal “honeycomb” coated
with the catalytic material. The element sits at the bottom
of the secondary combustion chamber. Smoke, gases
and particulates that are not fully combusted during the
secondary combustion process pass through the catalyst,
creatingatertiaryburn.Thisresultsinhighere󰀩ciencyand
lower emissions.
The catalyst will initiate combustion of smoke and particulates
at500°-600°F(260°-315°C),halfthetemperaturenormally
requiredforunaidedsecondarycombustion.Ifyoufollowed
the startup operation steps in the previous section the stove
willbesu󰀩cientlyhottoallowthecombustortowork.Once
the combustor starts working, heat generated by burning
the smoke will keep it working.
To determine whether the combustor is operating, refer to
the temperature probe which shows the operating range of
the catalytic combustor. This is located on the back of the
stove and is viewed from the top.
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/23 118390-204C
WARNING
!
DO NOT OPERATE THE STOVE WITH THE ASH
DOOR OPEN. OPERATION WITH THE ASH DOOR
OPEN CAN CAUSE AN OVER-FIRING CONDITION TO
OCCUR. OVER-FIRING THE STOVE IS DANGEROUS
AND CAN RESULT IN PROPERTY DAMAGE, INJURY
OR LOSS OF LIFE.
Andirons Help Protect the Glass
Yourstovehasandironstokeeplogsawayfromtheglass
panels. The andirons are essential to maintain clear re
viewing,andshouldbeleftinplace.Sincetheandironsmay
slightly hinder refueling through the front doors, most stove
owners will prefer the convenience of top loading through
the griddle. Do not place fuel between the andirons and the
doors.
Burn Only High-Quality Wood
TheEncore®Model2040-CAT-Cisdesignedtoburnnatural
woodonly;donotburnfuelsotherthanthatforwhichitwas
designed.
IMPORTANT: Do not burn any type of articial or
synthetic materials such as re starter logs (containing
wax) in this appliance. Never burn liquid-based fuels
such as kerosene, gasoline or alcohol.
Burninganymaterialsnotallowedintheseinstructions,or
over-ringthestove,mayvoidthewarranty.
You’ll enjoy the best results when burning woodthathas
beenadequately air-dried.The woodshould be 16”-18”
(406-457mm) in length.Avoidburning “green” woodthat
has not been properly seasoned. (Note: Properly seasoned
rewoodhasamoisturecontentbelow20percent.)Donot
burn construction materials; they often contain chemicals
and metals that can damage the inside surfaces of the
stoveandpollutetheair.Donotburnoceandriftwood;when
it burns, the salt it contains will attack the cast iron.
The best hardwood fuels include oak, maple, beech, ash,
and hickory that has been split, stacked, and air-dried
outside under cover for at least one year.
Ifhardwoodisnotavailable,youcanburnsoftwoodsthat
includetamarack,yellowpine,whitepine,Easternredcedar,
r,andredwood.Theseshouldalsobeproperlydried.
Storesplitwoodundercovertokeepitdry.Evenforshort-
term storage, be sure to keep wood a safe distance from the
stove and keep it out of the areas around the stove used for
refueling and ash removal.
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/2312 8390-204C
Surface Thermometer is a Valuable Guide to Operation
An optional surface thermometer tells you when to adjust
the air control, and when to refuel, Figure 2.8.
Figure 2.8-Taketemperaturereadingswithathermometerlocated
in the middle of the griddle.
For example, when the thermometer registers at least
450°F(230°C)onthestovetopafterstart-upyouknowthe
stove is hot enough and it may be time to close the damper
ifasu󰀩cientemberbedhasalsobeenestablished.Note
that the stove will warm up much sooner than the chimney,
though;awarmchimneyisthekeytoeasy,e󰀨ectivestove
operation.Whenthermometerreadingsdropbelow350°F.
(175°C)it’stimetoadjusttheaircontrolforahigherburn
rate or to reload the stove. A temperature reading over
650°F.(340°C)isasigntoreducetheairsupplytoslowthe
burn rate.
Usethefollowingtemperaturerangesasaguide:
• Readingsinthe350°-500°F.(175°-260°C)rangeindicate
low to medium heat output.
• 500°-600°F. (260°-315°C) readings indicate medium
heat output.
• Readingsof600°-650°F.(315-340°C)indicatehighheat
output. Operating your Encore® Model 2040-CAT-C
continuouslyatgriddletemperatureshigherthan650°F
(340°C)maydamagethecastironorenamelnish.
Use the Air Control Settings that Work Best for You
No single air control setting will t every situation. Each
installationwilldi󰀨erdependingonthequalityofthe fuel,
theamountofheatdesired,andhowlongyouwishthere
toburn; outdoor air temperature andpressure also a󰀨ect
draft.
The control setting also depends on your particular
installation’s “draft,” or the force that moves air from the
stove up through the chimney. Draft is a󰀨ected by such
things as the length, type, and location of the chimney, local
geography, nearby obstructions, and other factors.
Too much draft may cause excessive temperatures in
theEncore®Model 2040-CAT-C,andcouldevendamage
the stove. On the other hand, too little draft can cause
backpu󰀩ng into the room and/or the “plugging” of the
chimney.
Howdoyouknowifyourdraftisexcessivelyhighorlow?
Symptoms of too much draft include an uncontrollable
burnora glowing-redstovepart. Signsofweak draftare
smoke leaking into the room through the stove or chimney
connector joints or low heat output.
Insomenewerhomesthatarewell-insulatedandweather-
tight, poor draft may result from an insu󰀩cient air supply
inthehouse.Insuchinstances,anopenwindownearthe
stove on the windward side of the house can provide the
combustion air supply needed.
Another option for getting more combustion air to the stove
is to duct air directly from outside to the stove. In some
areas provisions for outside combustion air are required in
all new construction.
When rst using the stove, keep track of the air control
settings.Youwillquicklyndthataspecicsettingwillgive
youaxedamountofheat.Itmaytakeaweekortwoto
determine the amount of heat and the length of burn you
shouldexpectfromvarioussettings.
Most installations do not require a large amount of
combustion air, especially if adequate draft is available.
Donotforanyreasonattempttoincreasetheringofyour
heater by altering the air control adjustment range outlined
in these directions.
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/23 138390-204C
E. Ash Disposal
DO NOT OPERATE THE STOVE WITH THE ASH DOOR
OPEN. OPERATION WITH THE ASH DOOR OPEN CAN
CAUSE AN OVER-FIRING CONDITION TO OCCUR.
OVER-FIRING THE STOVE IS DANGEROUS AND CAN
RESULT IN PROPERTY DAMAGE, INJURY OR LOSS OF
LIFE.
Routineashremovalisimportantforeaseofmaintenance,
and is important for the stove’s durability. Remove ash
before it reaches the top of the ash pan. Check the level at
leastonceaday.Everyfewdays,clearanyashfromthe
outeredgesoftherebox.Mostoftheashwillfallthrough
thegrate.Stirtheashwithashovelorpokersothatitfalls
through the grate slots.
IMPORTANT: Check the level of ash in the ash pan before
reloadingthestove.Iftheashlevelisclosetothetopedge
ofthepan,emptythepanaccordingtothisprocedure:
• Openthedamper.
• Open the griddle or front doors, and use a shovel or
pokertostirexcessashthroughtheashslotsinthegrate
down into the ash pan.
• Close the griddle or doors, and unlatch the ash door,
Figure2.9.Itwillpivot,swingingtheashpanoutofthe
stove.
Figure 2.9- Turn the ashdoor handle clockwise to open and
counterclockwise to close.
Open
Close
• Removetheashpan,makingsuretokeepitlevel.
• Tokeepthecoverfromslidingo󰀨andtokeepashfrom
fallingontheoor,donottilttheashpanforward.
• If the stove is in operation, close the ash door while
disposingoftheash.Youmayneedtoliftthelatchend
of the door slightly to align the latch with the mating part
on the stove bottom.
• Properly dispose of the ash in a metal container with a
tight-ttinglid.Storethecontaineroutdoorsawayfrom
all combustible material.
• Returntheashpantoitsoriginalpositioninthestove,
and close and latch the ash door.
• Slidethecoverontothepan,makingsureitissecurely
closed,Figure2.10.
Figure 2.10-Besurethecoverissecurelyattachedbeforeremoving
the ash pan.
CAUTION
!
Never use your household or shop vacuum cleaner to
removeashfromthestove;alwaysremoveanddispose
of the ash properly.
Empty the ash pan regularly, typically every one to three
days. The frequency will vary depending on how you operate
yourEncore®Model2040-CAT-C:ashwillaccumulatefaster
at higher heat outputs.
Removed ash should be placed outdoors in a metal
containerwithatight-ttinglid.Keeptheclosedcontainerof
ashonanoncombustibleoororontheground,wellaway
from all combustible materials, pending nal disposal. If
the ash is disposed of by burial in soil or otherwise locally
dispersed, it should be kept in the closed container until all
cinders have thoroughly cooled.
WARNING
!
Do not operate the stove with the ash door open. This
will result in over-ring, and could cause damage to
the stove, void the warranty, or even lead to a house
re.
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/2314 8390-204C
F. Opacity (Visible Smoke)
This is the measure of how cleanly your appliance is burning.
Opacity is measured in percent; 100% opacity is when
an object is totally obscured by the smoke column from a
chimney,and0%opacitymeansthatnosmokecolumncan
be seen. As you become familiar with your appliance, you
should periodically check the opacity. This will allow you to
knowhowtoburnasnearlysmoke-freeaspossible(goalof
0%opacity).
Whenburningyourrstre,youwillexperiencesmokeand
odor from the appliance resulting from the curing of paint
andburningo󰀨ofanyoilsremainingfrommanufacturing.
OPEN WINDOWS DURING INITIAL BURN TO DISSIPATE
SMOKE AND ODORS!
• Odors may be irritating to sensitive individuals.
• Smokedetectorsmayactivate.
CAUTION
!
Fire Risk
• DONOTBURNGARBAGEORFLAMMABLE
FLUIDSSUCHASGASOLINE,NAPTHAOR
ENGINEOIL.
WARNING
!
• DoNOTburntreatedwoodorwoodwithsalt(driftwood).
• Maygeneratecarbonmonoxideifburnmaterialother
than wood.
Mayresultinillnessorpossibledeath.
Fire Risk
Keep combustible materials, gasoline and other
ammablevaporsandliquidsclearofappliance.
WARNING
!
• Combustible materials may ignite.
• DoNOTstoreammablematerialsintheappliance’s
vicinity.
• DO NOT USE GASOLINE, LANTERN FUEL,
KEROSENE, CHARCOAL LIGHTER FLUID OR
SIMILARLIQUIDSTOSTARTOR“FRESHENUP”A
FIREINTHISAppliance.
• Keep all such liquids well away from the appliance
while it is in use.
Negativepressureresultsfromtheimbalanceofairavailable
fortheappliancetooperateproperly.Itcanbestrongestin
lower levels of the house.
Causes include:
• Exhaustfans(kitchen,bath,etc.)
• Rangehoods
• Combustion air requirements for furnaces, water
appliances and other combustion appliances
• Clothes dryers
• Locationofreturn-airventstofurnaceorairconditioning
• ImbalancesoftheHVACairhandlingsystem
• Upperlevelairleakssuchas:
- Recessedlighting
- Attichatch
- Ductleaks
Tominimizethee󰀨ectsofnegativeairpressure:
• Install outside air to the stove with the intake facing
prevailing winds during the heating season
• Ensureadequateoutdoorairforall combustion appliances
andexhaustequipment
• Ensurefurnaceandairconditioningreturnventsarenot
located in the immediate vicinity of the appliance
• Avoid installing the appliance near doors, walkways or
small isolated spaces
• Recessedlightingshouldbea“sealedcan”design
• Attic hatches weather stripped or sealed
• Attic mounted duct work and air handler joints and seams
taped or sealed
G. Negative Pressure
Asphyxiation Risk
• Negative pressure can cause spillage of
combustionfumes,sootandcarbonmonoxide.
• Appliance needs to draft properly for safety.
WARNING
!
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/2315 8390-204C
Draft Testing: An easy way to test your chimney draft is to
closethestove’sdamper,waitafewminutestolettheairow
stabilize, then see whether you can vary the strength of the
rebyswingingtheaircontrolopenandclosed.Resultsare
notalwaysinstant;youmayneedtowaitafewminutesfor
achangeintheaircontrolsettingtohaveane󰀨ectonthe
re.Ifthere’snochange,thenthedraftisn’tstrongenough
yet to let you close the damper, and you’ll need to open it for
awhilelongerandmanagetherewiththeairinletuntilthe
draftstrengthens.Ifyoukeeptrackofyourburninghabitsand
relatethemtotheire󰀨ectsonthestove’soperation,you’llbe
rewarded with good performance and a safe system.
Conclusion: Wood-burningisanartratherthanascience.
Oncethestoveandchimneysystemareinplace,youcan
only vary your technique, mostly your timing, to achieve good
results.Ifyoukeeptrackofyourburninghabitsandrelatethem
totheire󰀨ectsonthestove’soperation,you’llberewarded
with good performance and years of reliable heating.
H. Important Information
Creosote is a by-product of slow wood-burning. It’s an
organictarthatcancondenseintheueifitispresentinthe
exhaust,slow-moving,andcoolstolessthan290°F(130°C).
Condensed creosote is volatile, and can generate chimney
resifitgetshotenough.Allthefeaturesthata󰀨ectchimney
draftalsoa󰀨ectcreosotecondensation-sousewhatever
combination of installation features and operational steps that
will encourage good draft and minimize creosote production.
Becauselettingtheexhaustcoolo󰀨andslowdownisoneof
the keys to creosote accumulation, it makes sense to line a
chimney to match the stove’s outlet size, for safety reasons
as well as performance. Canadian law requires a matching
linertoserveanystoveorinsertventedthroughareplace
chimney;intheUS,theNationalFireProtectionAssociation
(NFPA)recommendsachimneylineriftheueismorethan
threetimesbigger(insquarearea)thantheoutletonthe
stoveorinsert.SomelocalitiesenforcetheNFPAguidelines
as part of their building codes.
Fuel: Eventhebeststoveinstallationwillnotperformwell
withpoorfuel.Thebestfuelishardwoodthathasair-dried
12-18months.Softwoodburns,butnotaslongashardwood.
‘Green’woodcontainsalotofmoisture;itwillburn,butsome
oftheheatpotentialisusedtoboiltheextramoisturefrom
the wood. This reduces the amount of heat that reaches your
home and can contribute to a creosote problem. There are
moisturemetersavailableforrewood;youcanalsojudge
yourwoodbyitsappearanceandweight(Moisturecontent
of20%orlessisbest).Ifyougetitgreen,liftapieceandget
asenseofitsweight;itcanloseathirdormoreofitsweight
asitdries.Alsolookattheendsofalog;asitdriesitshrinks
and often cracks. The more weathered and cracked a piece
is, the drier it is.
Drywoodburnsreadilywithagoodchimneydraft.Butwith
modernstoves,woodcanbetoodryandtoovolatile.Smoke
and combustible gases can ‘gas out’ from the wood quickly
anddenselyenoughtooverloadthecombustionsystem.If
youheararumblingorroaringnoise(likeapropanetorch)
fromthestove,thatisasignthatthestoveisover-ring.
Back-pu󰀩ngresultswhenthereproducesvolatilegases
fasterthanthechimneydraftpullsthemoutoftherebox.
Thegasesbackupinthereboxuntiltheyareconcentrated
enoughandhotenoughtoignite.Ifyourstoveback-pu󰀨s,
thestoveneedstocooldown.Youshouldopenthedamper
toletthesmokerisetotheuemorequickly,allowmoreair
intotherebox,avoidbigloadsofrewoodandcheckthat
the wood moisture is not too low.
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/23 168390-204C
Keep Your Stove Looking New and Working Its Best
Letthereinthestovegooutandallowthestovetocool
completely before beginning any maintenance procedure.
This wood appliance needs periodic inspection and repair for
properoperation.Itisagainstfederalregulationstooperate
this wood appliance in a manner inconsistent with operating
instructions in this manual.
Care of the Cast Iron Surface
An occasional dusting with a dry rag will keep the painted
castironofyourEncore®Model2040-CAT-Clookingnew.
The stove’s paint can be touched up as needed. First, mask
the areas, such as enameled parts, glass, or handles, around
the spot to be painted. Clean the spot with a wire brush.
Removethegriddleandsetitaside.Itisnormalforthegriddle
todarkenafteruse.Youcancleanitwithane-bristlewire
brush, or steel wool.
Then, touch up the stove with high temperature stove paint.
Applythepaintsparingly;twolightcoatsofpaintarebetter
than a single heavy one.
Care of the Porcelain Enamel Surface
Useadryorslightlydampragorsoftbrushtoremovespills
orstains.Fordi󰀩cultjobsthatrequireacleaningagent,use
only a kitchen appliance cleaner or polish recommended for
use on enamel surfaces.
Ifporcelainenamelbecomeschippedorscratchedduring
use,apply“enamelepoxy”tothedamagedareaandallow
todry.Oncetheepoxyhasdried,sandtheareatoblendwith
surroundingareaandapplyappropriatecolortouch-uppaint.
Allow to dry completely before operating stove.
A. Cleaning and Replacement of Glass
Mostofthecarbondepositsontheglasswillburno󰀨during
hotres.
However, the ash residue that accumulates on the glass
surface should be removed regularly to prevent etching. To
cleantheglass,followthisprocedure:
• Besuretheglassiscompletelycool.
• Clean the glass with water or a cleaner made especially for
thispurpose.Donotuseabrasivecleaners.Usecleaning
agentssparinglyandbesuretokeepthemo󰀨theouter
surfaces of the stove.
• Rinsetheglassthoroughly.
• Dry the glass completely.
Replace Broken Glass Immediately
Do not operate your stove if the glass in the doors is damaged.
Ifyouneedtoreplacetheglass,useonlythehightemperature
5mmceramicglasssuppliedbyVermontCastings.Donot
use substitutes.
3 3 Maintenance
Removing the Glass
1.Removetherightandleftdoorassembliesbyraisingthe
dooruntilthelowerhingepinclearsitshole;then,angle
the door bottom slightly outward and pull down to release
the upper hinge pin. Place the doors face down on a
paddedworksurface.Beespeciallycarefulwithenameled
doors.
2.Removethescrewsthatholdtheglassretainerclipsin
place, and remove the clips.
3.Carefullyliftthebrokenglasspanelfromthedoor.
Installing the Glass
Checkthegasketaroundthewindow;itshouldbesoftand
resilient so that the glass will seal properly against the door.
Replacethegasketifithashardenedorifitiscompressed.
1. Center the glass on the gasket.
2.Securetheglassonbothdoorswiththeretainerclips.
Tightenallscrews,Figure3.1.
3. Replacethedoorsonthestove.
4.Openandclosethedoorstocheckthattheytandwork
properly. Adjust as necessary.
Figure 3.1-Explodedviewoftheglassassemblyfortherightdoor.
ST854
glass xview
7/05
Retainer
Clips(4)
Glass Panel
Gasket
RightDoor
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/2317 8390-204C
Figure 3.3-Rotatepawland/orremoveatwashertoadjustlatch.
ST1154
door pawl
Roller
LockNut
SetScrew
ShoulderScrew
HandleStub
FlatWasher
E. Gasket Replacement (as needed)
Your Encore® Model 2040-CAT-C uses berglass rope
gasketstomakeatightsealbetweensomeparts.Withuse,
particularly on moving parts, gaskets can become brittle and
compressedandcanbegintolosetheire󰀨ectiveness.These
will need periodic replacement.
The sizes of replaceable gasket are listed below, along with
their applications.
Gasket Diameter......And the Parts it Seals
5/16” Thegriddletothestovetop(wirereinforcedgasket)
5/16” Thedampertotheupperreback
3/8” Thefrontdoorstothestovefront;andthedoorsto
each other.
3/8” Theashdoortothefrontofthebottompanel
3/16” Theouterglasspanestothedoor
Ifyouneedtochangeagasket,rstobtainanappropriate
replacementfromyourVermontCastings’AuthorizedDealer.
Waituntilthereisoutandthestovehascooled.Besureto
follow the standard safety procedure for working with dusty
materials:wearsafetygogglesandadustmask.
The procedure for replacing gaskets is the same, regardless
ofthegasketlocation.Followthesesteps:
1. Removetheexistinggasketbygraspinganendandpulling
rmly,Figure3.4.
Tighten the Damper Handle as Needed
A handle on the left side of the stove controls the damper.
The handle attaches to the damper rod with a set screw.
Periodically check the set screw and tighten as necessary.
C. Front Door Adjustment
The load doors are factory adjusted for clearance, proper
sealing and latch operation. However, the doors can
sometimes shift in transit or from use and may need to be
readjusted.Theadjustment/alignmentprocedureissimple
andonlyrequiresa7/16”wrenchandafewminutes.We
haveprovidedadetailedvideoexplaininghowtoproperly
adjust and align the doors.
D. Ash Door Adjustment
Just like the load doors, the ash door is factory adjusted for
properlyoperationandminimalsag.Ifthedoordoesrequire
adjustment to minimize sagging at the latch side, a simple
adjustmentrequiringonlya7/16”wrenchwillgetthedoor
back into proper alignment. We have provided adetailed
videoexplaininghowtoproperlyadjusttheashdoor.
Note: For video instruction please refer to www.
vermontcastings.com.ClickontheYouTubelinklocated
intheupperrighthandcornernexttothe“Search”bar.
B. Damper Adjustment (as Needed)
ThetensionontheEncore®Model2040-CAT-C’sdamperis
adjustable to compensate for compression of the gasket that
sealsthedampertotheupperreback.Toadjustthedamper:
1. Removethegriddle.Loosenthelocknutatthecenterof
thedamper,Figure3.2.
2. Turnthe pressure screw approximately one half turn
clockwise with an Allen wrench provided with your stove.
3. Tighten thelock nut. Prevent thepressurescrew from
turningasyoutightenthenut.Re-testthedamper.
Figure 3.4-Removegasketthencleanchannelwithwirebrush.
Pressure Adjusting
Screw
AllenWrench
LockNut
Damper
Figure 3.2-AdjustthedamperwiththeAllenwrench.
►
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/23 188390-204C
Cement
Stove Gasket
Figure 3.5-Layabeadofgasketsiliconeorcementthenpress
gasket in place.
F. The Chimney System
Creosote
Your Encore® Model 2040-CAT-C is designed to reduce
creosote build-up signicantly. However, regular chimney
inspection and maintenance must still be performed. For
safety, good stove performance, and to protect your chimney
and chimney connector, inspect your chimney and chimney
connector on a regular schedule. Clean the system if
necessary. Failure to keep the chimney and connector system
cleancanresultinaseriouschimneyre.
6.Startingatoneend,pressthegasketintothechannel,
Figure3.5.Ensureagoodjointwherethegasketmeets
beforetrimminganyexcess.Donotoverlapthegasket
ends or leave ends with ragged edges.
7.Pressthegasketedpartrmlyagainstitsnormalmating
surface to seat the gasket evenly in its channel. Close
and latch the door to do this, or tap other parts with the
rubbermallet(orhammer/blockofwood).
8.Cleananyexcesscementfromaroundthechannel,then
let the cement that holds the new gasket dry thoroughly.
9.Thestove’sdoorsmayneedadjustmentafteryouhave
regasketedthem. Initially, it may require looseningthe
latchtoaccommodatethenewgasket;afterafewweeks,
it may need tightening to compensate for compression of
the new gasket.
All Gasketed Construction Gaskets
Othergasketsformsealsbetweenallothernon-movingparts,
but these are not subject to the same wear and deterioration
asgasketsonmovingparts.Itisunlikelythatyouwillever
need to replace these gaskets unless the involved parts are
disassembledandthenputbacktogether.Ifthisisthecase,
thejobshouldbedoneonlybyaqualiedservicetechnician.
5/16”diametergasketsealsthefollowingparts:
• Thelowerrebacktothebackpanel
• Theleftandrightairplates(innersides)
• All connections between the stove plates.
2. Use a wire brush or the tip of a screwdriver to clean
the channel of any remaining cement or bits of gasket.
Removestubborndepositsofcementwithacoldchisel
ifnecessary,Figure3.4.
3.Determine the correct length of the appropriate-sized
gasketbylayingitoutinthechannel.Allowanextra1-2"
(25-50mm),andmarkthespottobecut.
4.Removethegasketfromthechannel,placeitonawood
cutting surface, and cut it at the marked spot with a utility
knife.
Twist the ends slightly to keep the gasket from unraveling.
5.Layanunbroken1/8"(3mm)beadofsiliconeorcement
inthenewly-cleanedchannel,Figure3.5.
Whenwoodisburnedslowly,itproducestar,organicvapors
and moisture that combine to form creosote. The creosote
vaporscondenseintherelativelycoolchimneyueofaslow-
burningre.Asaresult,creosoteresidueaccumulatesonthe
uelining.Whenignited,thiscreosotemakesanextremely
hotrewithintheuesystemthatcandamagethechimney
andoverheatadjacentcombustiblematerial.Ifasignicant
layerofcreosotehasaccumulated—1/8”(3mm)ormore
—itshouldberemovedtoreducetheriskofachimneyre.
Youcanneverbetoosafe.Contactyourlocalreauthority
forinformationonwhattodointheeventofachimneyre,
and have a clearly understood plan on how to handle one.
Ifyoudoexperienceachimneyre,actpromptlyto:
• Close the damper and air control lever.
• Get everyone out of the house.
• Call the Fire Department.
Inspect the system every two weeks during the heating
season as part of a regular maintenance schedule. To inspect
the chimney, let the stove cool completely. Then, using a
mirrorandastronglight,sightupthroughtheuecollarinto
thechimneyue.Ifyoucannotinspecttheuesysteminthis
fashion, the stove must be disconnected to provide better
viewing access.
Clean the chimney using a brush the same size and shape
astheueliner.Flexibleberglassrodsareusedtorunthe
brush up and down the liner, causing any deposits to fall
to the bottom of the chimney where they can be removed
throughtheclean-outdoor.
Clean the chimney connector by disconnecting the sections,
takingthemoutside,andremovinganydepositswithasti󰀨
wirebrush.Reinstalltheconnectorsectionsaftercleaning,
being sure to secure the joints between individual sections
with sheet metal screws.
Ifyoucannotinspectorcleanthechimneyyourself,contact
yourlocalVermontCastingsdealeroraprofessionalchimney
sweep.
WARNING
!
Inspect and Clean Chimney Frequently – Under
certain conditions of use, creosote buildup may occur
rapidly.
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/23 198390-204C
The Chimney Connector
Two Weeks
• Inspect the chimney connector and chimney. Clean if
necessary.
Two Months:
• Inspectthechimneyandchimneyconnector.Payparticular
attention to the horizontal runs of chimney connector, and
the elbows. Clean the system if necessary.
Annual Spring Cleaning:
• Disassemble the chimney connector and take it outdoors
forinspection and cleaning. Replace weak sections of
connector.
• Inspectthechimneyforsignsofdeterioration.Repairsto
a masonry chimney should be made by a professional
mason.Replacedamagedsections of prefabricated
chimney.Your local VermontCastings dealer or a
chimney sweep can help determine when replacement
is necessary.
• Thoroughly clean the chimney.
G. The Catalytic Element
Maintenance Schedule-The Stove
Daily:
• Clear any ash build-up from around the air holes and
combustionowpathinthelowerreback.
• Ashes should be removed before they reach the top of
the ash pan. Check accumulation at least once a day.
• Keep the area around the stove clear of any combustible
materials such as wood, furniture or clothing.
Two Months:
• Check door handle to be sure it is working properly.
Gasketing becomes compressed after a period of time.
Adjust handle tightness if necessary.
• Check leg bolts and heat shield screws; tighten if
necessary.
Annual Spring Cleaning:
• Check gasketing for wear, and replace if necessary.
• Remove ashes from the ash pan and replace with a
moistureabsorbingmaterial(suchaskittylitter)tokeep
the interior of the stove dry.
• Clean the dust from the inner sides of bottom, rear or pipe
heat shields if your stove is equipped with them. Clean
surfacesarebetterheatreectorsthandirtysurfaces.
• Touch up the black paint.
• Inspectforandremoveashbuild-upbehindthecombustion
package. This should be done in conjunction with annual
cleaningofthechimneyconnector.Inspectthepassage
behindthecombustionpackage(amirrorwillbehelpful)
and vacuum away ash using a exible vacuum hose
insertedinthepassage,Figure3.6.
CAUTION
!
BURN UNTREATED WOOD ONLY. OTHER MATERIALS
SUCH AS WOOD PRESERVATIVES, METALS, FOILS,
COAL, PLASTIC, GARBAGE, SULPHUR, OR OIL, MAY
DAMAGE THE CATALYST.
This wood heater contains a catalytic combustor, which needs
periodicinspectionandreplacementforproperoperation.In
theUnitedStatesitisagainstthelawtooperatethiswood
heater in a manner inconsistent with the operating instructions
in this manual.
Undernormaloperatingconditions,thecatalyticcombustor
shouldremainactivefortwotosixyears(dependingonthe
amountofwoodburned).However,itisimportanttomonitor
the combustor periodically to ensure that it is functioning
properly, as well as to determine when it needs to be replaced.
Anon-functioningcombustorwillresultinalossofheating
e󰀩ciency,andanincreaseincreosoteandemissions.
Inspection and Cleaning
Inspectthecombustorforyashaccumulationandphysical
damage two to three times per year. Clean the combustor
as needed.
The refractory package that houses the catalytic combustor
shouldbeinspectedfor a buildupofyashandcleaned
if necessary. This may be done when you examine the
combustor.
Clean out any
ash build up
Removethese
components
Figure 3.6 - Inspectandcleanoutashaccumulationbehindthe
combustion system.
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/23 208390-204C
When to Suspect a Combustor Problem
The best way to evaluate the performance of your appliance’s
combustor is to observe the amount of smoke leaving the
chimney—bothwhenthecombustorhas“lighted-o󰀨”and
whenithasnot.Followthesesteps:
• Witharegoingandthecombustorproperlyactivated,with
the damper closed to route smoke through it as described
in the Operation Section, go outside and observe the
smoke leaving the chimney.
• Then, open the stove damper and once again check the
smoke leaving the chimney.
You should see signicantly more smoke when thestove
damperis open and exhaust does not pass through the
combustor.However,becarefulnottoconfusesmokewith
steamfromwetwood.Steamdissipatesintheairquickly;
smoke does not.
Ifthistestindicatesaproblem,considerotherpossiblefactors
as well, such as the weather or a change in the quality of
yourfuel.Inwarmweather,draftisweakerthanitisincolder
winterweather,andrescanburnsluggishly.Small,hotres
are a good solution under these conditions.
Burning“green”(insu󰀩cientlyseasoned)woodwillresultin
poorer performance than burning properly seasoned fuel.
Reloadingwith green wood can also thermal shock the
catalyst, resulting in cracking, or the eventual fallout, of the
ceramichoneycombsubstrate.Youmayhavetorunyour
stovehotter(moreair)toachieveacceptableperformance
using green or wet wood.
Also, consider any changes in your operating routine.
Onceyouhaveruledoutanyotherpossiblecausesfora
decline in performance, inspect and clean the combustor if
necessary.Besuretoprotectanysurfaceyouuseforsetting
the stove parts aside.
Also, consider any changes in your operating routine.
Onceyouhaveruledoutanyotherpossiblecausesfora
decline in performance, inspect and clean the combustor if
necessary.Besuretoprotectanysurfaceyouuseforsetting
the stove parts aside.
Inspecting the Combustor
Removeaccessdoorandinnerrebrick.Removethecatalytic
combustorbyliftingupandpullingtowardsyou,Figure3.7.
NOTE
Burning“green”(insu󰀩cientlyseasoned)woodwillresult
in poorer performance than burning properly seasoned
fuel.Reloadingwithgreenwoodcanalsothermalshock
the catalyst, resulting in cracking, or the eventual fallout, of
themetalhoneycombsubstrate.Youmayhavetorunyour
stovehotter(moreair)toachieveacceptableperformance
using green or wet wood.
ST1180
catalyst access
Catalyst
Access Door
InnerFireback
Figure 3.7-Inspectthecatalyticcombustor.
To assure a long life for the combustor, it is recommended
to service the combustor on a regular basis based on the
amountofuse.Thisproceduretakesaboutve(5)minutes
andrequiresno tools except for a vacuum if cleaning is
necessary.
Cleaning the Combustor
1. Check the combustors honeycomb-like element for a
buildupofyash.Ifanyisevident,takethecombustor
outside and clean it by blowing air gently through it. Do
notpushanythingthroughthehoneycomb;donotuse
compressedairtoclearthepassages.Suchabrasioncan
scrapethethincoatingofplatinum(thecatalyst)o󰀨the
ceramic base, shortening the catalyst’s life and reducing
itse󰀨ectiveness.
2.Inspecttheelementfordamageordegradation.Although
small hairline cracks will not a󰀨ect performance, the
element should be essentially intact. If the element is
broken in pieces or has sections missing, it should be
replaced. Call your local Vermont CastingsAuthorized
Dealer for a replacement element.
3.Iftheelementisingoodconditionandclean,re-installit
inthestoveandreplacetherefractoryinnerrebackand
access door.
Operate the stove in your usual manner for two weeks,
inspecting the chimney and the chimney connector frequently
during this period.
If creosote does not build up as fast, it is likely that the
performance change was caused by y ash deposits on
thecatalyticelement.However,continuetheinspectionsof
the chimney system for a few weeks to ensure that proper
performance continues.
Ifyoucontinuetonda signicantcreosotebuildup or if
you continue to see excessive smoke from the chimney,
the catalytic element will need to be replaced. Contact your
nearestVermontCastings’AuthorizedDealerforinformation
about a replacement element.
NOTE: Use only the replacement catalyst supplied by a
VermontCastingsdealer.
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/23 218390-204C
4 4 Troubleshooting Guide
Withproperinstallation,operation,andmaintenanceyourwoodappliancewillprovideyearsoftrouble-freeservice.Ifyoudo
experienceaproblem,thistroubleshootingguidewillassistyouoraqualiedservicepersoninthediagnosisofaproblem
and the corrective action to be taken.
Contact your dealer for additional information regarding operation and troubleshooting.
Visitwww.vermontcastings.comtolocateadealer.
Start Fire Problems Possible Cause Solution
•Cannotgetrestarted
•Excessivesmokespillage
•Burnstooslowly
•Notenoughheatoutput
Not enough kindling/paper or no
kindling/paper
Usedrykindling,morepaper.Arrange
kindling&woodforairmovement.
Notenoughairforretoignite
Check for restricted termination cap
Check for blockage of outside air kit (if
installed).
Checkforueblockage.
Pre-warmuebeforestartingre.
Check for adequate vent height (refer
toChimneyHeightSection).
RefertoNegativePressuresection
Woodconditionistoowet,toolarge Use dry, seasoned wood (refer to
WoodBurningOperation).
Bed of coals not established before
adding wood
Startwithpaper&kindlingtoestablish
bed of coals (refer to Wood Burning
Operation).
Flue blockage such as birds’ nests or
leaves in termination cap
Have chimney inspected for creosote
and cleaned by a certied chimney
sweep.
Down draft or negative pressure
Competitionwithexhaustdevices
Donotuseexhaustfansduringstart-up
(refertoNegativePressureSection).
Fire burns too fast
Extremelydryorsoftwood
Mixinhardwood.
Mixinlargerpiecesofwoodafterreis
established.
Overdrafting
Checkforcorrectventheight;toomuch
vertical height creates overdrafting.
Check location of vent termination
(refer to Chimney Termination
Requirement Section in Installation
Manual).
LowHeatOutput CoalBedtoosmall
Open damper. Establish deeper coal
bed and move coals to the rear of the
rebox.
ExcessiveCoalBed Operatingonhighforextendedperiods Reduce burn rate and allow coals to
burn down before reloading.
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/23 228390-204C
5 5 Reference Materials
Date of Service Performed By Description of Service
A. Service & Maintenance Log
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/2323 8390-204C
B. Service Parts & Accessories
Service Parts
Beginning Manufacturing Date: Mar 2019
Ending Manufacturing Date: Active
Encore CAT-C
Part number list on following page. 12/23
2040-CAT-C (Classic Black)
2041-CAT-C (Biscuit) - Ending Manufacturing Date: Dec 2021
2042-CAT-C (Majolica Brown)
2044-CAT-C (Bordeaux)
2046-CAT-C (Twilight)
2040T-CAT-C (Classic Black w/TransitionDoors)
56
78
3
21
17 20
19
16
18 58
12
22
63
57
32
38
31
36
39
46
87 27 26
69
70
66
65a
69
40
49
37
79
48 59
30
29
26 28 71
5
68
67
62
61b
77
55
82
54
53 52
50
16
51
27
2
76
10
11
73
49
80
80
14
24
75
74
85
72
23
23 8
25
15
45
6
7
47 84
64
64
13
9
33
76
83
81
86
34
60
1
4
89
90
91
92
93
61a
65b
88
94
35 41
42
43
44
95
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/23 248390-204C
Service Parts
Beginning Manufacturing Date: Mar 2019
Ending Manufacturing Date: Active
Encore CAT-C
IMPORTANT: THIS IS DATED INFORMATION. Parts must be ordered from a dealer or distributor.
Hearth and Home Technologies does not sell directly to consumers. Provide model number
and serial number when requesting service parts from your dealer or distributor.
Stocked
at Depot
ITEM DESCRIPTION COMMENTS PART NUMBER
1 Brick Support Bracket 30005279
2 Griddle Gasket, 10’ 1-00-1203668 Y
3 Back 30005289A
4 Refractory Right End 30005497
5 Refractory Left End 30005498
6 Refractory Support 30005233
7 Gasket, Refractory Support 30005237
8 Back Insulation Board 30005269
9 Outer Back 30005261
10 Left Griddle Quadrant 30002399A
11 Right Griddle Quadrant 30002401A
12 Griddle 30002386A
13 HS Flue Collar 30005266
14 Bracket Upper Side 30005267
15 Catalyst, Ceramic 30006623
16 Damper Gasket, 15’ 1-00-1203588 Y
17 Damper Ramp 2-00-1301811S Y
18 Damper Housing 30005293A
19 Damper 30006467
20 Damper Tab Pkg of 10 1601488-10
21 Damper Rod 1600851
22 Griddle Handle Assembly 30002775 Y
23 Gasket, Back Refractory, 10’ 1-00-30005270
24 Rheostat Bracket 30002863
25 Refractory, Engine - E/D 30005202
26 Damper Handle Screw (Qty 2 req) Pkg of 10 1201310-10
27 Damper Handle Qty 2 req 1600664 Y
28 Damper Handle w/Screw 30002720A Y
29 Left Side
Classic Black 30002388A
Biscuit SRV30003052
Bordeaux SRV30006679
Ebony SRV30003072
Majolica Brown SRV30004876
Twilight SRV30007027
30 Left Air Manifold 30002408
31 Right Air Manifold 30005290
Additional service part numbers appear on following page.
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/2325 8390-204C
Service Parts
Beginning Manufacturing Date: Mar 2019
Ending Manufacturing Date: Active
Encore CAT-C
IMPORTANT: THIS IS DATED INFORMATION. Parts must be ordered from a dealer or distributor.
Hearth and Home Technologies does not sell directly to consumers. Provide model number
and serial number when requesting service parts from your dealer or distributor.
Stocked
at Depot
ITEM DESCRIPTION COMMENTS PART NUMBER
32 Right Side
Classic Black 30002405A
Biscuit SRV30003053
Bordeaux SRV30006680
Ebony SRV30003073
Majolica Brown SRV30004877
Twilight SRV30007028
33 Thermostat Handle Base 30002716 Y
34 Washer Damper Rod Pkg of 10 30007257-10
35 Refractory Gasket Plate, S/S (Included w/SRV8787-021) No longer available SRV8000-008
36 Inner Bottom 30005291
37 Ashdoor Hinge Upper 1-00-30002403
38 Door Handle Bracket 30002909
39 Bottom Outer 30007510A
40 Ashlip
Classic Black 30002402A
Biscuit SRV30003051
Bordeaux SRV30006678
Ebony SRV30003071
Majolica Brown SRV30004862
Twilight SRV30007026
41 Gasket, Fireback (Included w/SRV8787-021) No longer available 30005209
42 Gasket, Slotted Refractory (Included w/SRV8787-021) No longer available SRV8344-001
43 Refractory, Fireback ( Pre HF2522164 must also order SRV8340-011 & SRV8787-021) SRV8340-012
44 Retainer, Fireback Refractory Qty 2 req 30005248
45 Refractory, Inner Cover 30005205 Y
46 Andiron Qty 2 req 30002397A Y
47 Refractory, Access Cover Pre HF2522164 30007251
Post HF2522164 SRV8340-011
48 Leg Leveler Pkg of 10 1201745-10
49 Ashdoor Handle Shaft 1600622
50 Pawl Assembly Qty 2 req 30005157 Y
51 Ashdoor 30002392A
52 Ashdoor Handle (Wood) 1600663 Y
53 Hinge Hardware 1-00-2473
54 Ashdoor Hinge Lower 1-00-30002404
55 Ashpan Bracket 1601039
56 Lower Side Bracket 30005268
57 Thermostat Handle 1600660 Y
58 Front Manifold 30002407
Additional service part numbers appear on following page.
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/23 268390-204C
Service Parts
Beginning Manufacturing Date: Mar 2019
Ending Manufacturing Date: Active
Encore CAT-C
IMPORTANT: THIS IS DATED INFORMATION. Parts must be ordered from a dealer or distributor.
Hearth and Home Technologies does not sell directly to consumers. Provide model number
and serial number when requesting service parts from your dealer or distributor.
Stocked
at Depot
ITEM DESCRIPTION COMMENTS PART NUMBER
59 Front
Classic Black 30002393A
Biscuit SRV30003054
Bordeaux SRV30006681
Ebony SRV30003074
Majolica Brown SRV30004878
Twilight SRV30007029
60 Flue Collar Gasket 15 Ft 1-00-30002422 Y
61a
Left Door (Shell Enamel Parts)
Classic Black 30003938A
Biscuit SRV30003958
Bordeaux SRV30006685
Ebony SRV30003962
Majolica Brown SRV30004884
Twilight SRV30007033
Left Door Sub Assembly (Shell Enamel Parts)
(Does not contain glass or glass gasket)
Classic Black 30003974
Biscuit 30003984
Bordeaux 30006687
Ebony 30003988
Majolica Brown 30004882
Twilight 30007072
61b
Left Door (Transition Door Enamel)
Classic Black 30007081A
Biscuit SRV30007083
Bordeaux SRV30007087
Majolica Brown SRV30007085
Twilight SRV30007107
Left Door Sub Assembly (Transition Door Enamel)
Classic Black 30007165
Biscuit 30007167
Bordeaux 30007169
Majolica Brown 30007171
Twilight 30007173
62 Door Hinge Strip 1308634A
63 Top
Classic Black 30002387A
Biscuit SRV30003055
Bordeaux SRV30006682
Ebony SRV30003075
Majolica Brown SRV30004879
Twilight SRV30007030
Additional service part numbers appear on following page.
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/2327 8390-204C
Service Parts
Beginning Manufacturing Date: Mar 2019
Ending Manufacturing Date: Active
Encore CAT-C
IMPORTANT: THIS IS DATED INFORMATION. Parts must be ordered from a dealer or
distributor. Hearth and Home Technologies does not sell directly to consumers. Provide
model number and serial number when requesting service parts from your dealer or distributor.
Stocked
at Depot
ITEM DESCRIPTION COMMENTS PART NUMBER
64 Glass Clip Pkg of 4 SRV1601394 Y
65A
Right Door (Shell Enamel Parts)
Classic Black 30003939A
Biscuit SRV30003959
Bordeaux SRV30006684
Ebony SRV30003963
Majolica Brown SRV30004883
Twilight SRV30007032
Right Door Sub Assembly (Shell Enamel Parts)
(Does not contain glass or glass gasket)
Classic Black 30003975
Biscuit 30003985
Bordeaux 30006686
Ebony 30003989
Majolica Brown 30004881
Twilight 30007073
65B
Right Door (Transition Door Enamel)
Classic Black 30007080A
Biscuit SRV30007082
Bordeaux SRV30007086
Majolica Brown SRV30007084
Twilight SRV30007106
Right Door Sub Assembly (Transition Door Enamel)
Classic Black 30007166
Biscuit 30007168
Bordeaux 30007170
Majolica Brown 30007172
Twilight 30007174
66 Door Gasket, 15’ 1-00-1203588 Y
67 Glass Gasket, 10’ 1-00-1186258229 Y
68 Left Door Glass 30005300
69 Right Door Glass 30005299
70 Door Hinge Pin Qty 2 req 30002727 Y
71 Spacer (for Damper Rod) Pkg of 10 1201779-10
72 Primary Air Valve Assembly 30005324
Primary Air Frame 1307411
Primary Air Rod 30005260
73 Front Door Handle and Shaft 30002717 Y
74 Thermostat Friction Spring Pkg of 10 1201846-10
75 Thermostat Handle Bolt Pkg of 10 1201243-10
76 Cable Assembly Call Tech 5005471
Additional service part numbers appear on following page.
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/23 288390-204C
Service Parts
Beginning Manufacturing Date: Mar 2019
Ending Manufacturing Date: Active
Encore CAT-C
IMPORTANT: THIS IS DATED INFORMATION. Parts must be ordered from a dealer or
distributor. Hearth and Home Technologies does not sell directly to consumers. Provide
model number and serial number when requesting service parts from your dealer or distributor.
Stocked
at Depot
ITEM DESCRIPTION COMMENTS PART NUMBER
77 Ash Pan Assembly 5005746
78
Flue Collar, 6” Round
Classic Black 0001580
Biscuit 0001595
Bordeaux SRV30006683
Ebony SRV30003162
Majolica Brown 0001589
Twilight SRV30007031
Flue Collar, 8” Oval
Classic Black 0000555
Biscuit 0000556
Bordeaux 0000560
Ebony SRV30003032
Majolica Brown 0000557
Twilight 0000561
79 Single Leg
Classic Black 30002396A
Biscuit SRV30003050
Bordeaux SRV30006677
Ebony SRV30003070
Majolica Brown SRV30004874
Twilight SRV30007025
80 Hex Head Jam Nut (Qty 2 req) Pkg of 10 1203290-10
81 Bottom Heat Shield 30002470
82 Bottom Heat Shield Right Wing 30005030
83 Bottom Heat Shield Left Wing 30005031
84 Grate Bottom 30005294
85 Thermostat Assembly 5005470
86 Washer Pkg of 10 1202471-10
87 Handle Base Sub 30002714
88 Fallaway Handle Complete 30004175K
89 Thermostat Handle Assembly 30007067
90 Primary Air Cover 30007069
91 Primary Air Base 30007071
92 Temperature Probe 30007274
93 Bracket, Temperature Probe 30007278
Tempertature Probe Assembly 30007283A
94 Gasket, Ceramic Fiber SRV30007513
95 Fireback Plate & Gaskets SRV8787-021 Y
Finish Bag SRV30007514
Additional service part numbers appear on following page.
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/23 298390-204C
Service Parts
Beginning Manufacturing Date: Mar 2019
Ending Manufacturing Date: Active
Encore CAT-C
IMPORTANT: THIS IS DATED INFORMATION. Parts must be ordered from a dealer or
distributor. Hearth and Home Technologies does not sell directly to consumers. Provide
model number and serial number when requesting service parts from your dealer or distributor.
Stocked
at Depot
ITEM DESCRIPTION COMMENTS PART NUMBER
Warming Shelf Kit
Classic Black 0000200
Biscuit 0000205
Bordeaux 0000199
Majolica Brown 0000208
Twilight 0000198
Shelf
Classic Black 30002477A
Biscuit SRV30003094
Bordeaux SRV30006689
Majolica Brown SRV30004850
Twilight SRV30007074
Dragon Bracket
Classic Black 1302220A
Biscuit SRV30002948
Bordeaux 30006690A
Majolica Brown SRV30004818
Twilight SRV30007075
Bracket, Left 30002478A
Bracket, Right 30002479A
Outside Air Kit 1-10-09542
Vermont Castings • Encore Model 2040-CAT-C Owner’s Manual_R14 • 2019 - ___ • 12/2330 8390-204C
CONTACT INFORMATION
Hearth&HomeTechnologies
352MountainHouseRoad
Halifax,PA17032
Please contact your Vermont Castings dealer with any questions or concerns.
For the number of your nearest Vermont Castings dealer log onto www.vermontcastings.com
Thisproductmaybecoveredbyoneormoreofthefollowingpatents:(UnitedStates)5341794,5263471,6688302,7216645,7047962
orotherU.S.andforeignpatentspending.
We recommend that you record the following pertinent
information for your heating appliance.
Datepurchased/installed:
SerialNumber: Locationonappliance:
Dealershippurchasedfrom: Dealerphone:
Notes:
C. Contact Information
DO NOT DISCARD THIS MANUAL
• Important operating
and maintenance
instructions included.
•
Leavethismanualwith
party responsible for use
and operation.
•
Read,understandand
follow these instructions
for safe installation and
operation.
CAUTION
DO NOT
DISCARD
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vermont Castings Encore at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vermont Castings Encore in the language / languages: English as an attachment in your email.

The manual is 4.61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vermont Castings Encore

Vermont Castings Encore User Manual - French - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info