3.6.4 Footrest B06
To remove
1. Pull footrest lever (7) and swing footrest (8) outwards.
2. Lift the footrest to remove it.
To install
1. Hold footrest (8) sideways and hang it in footrest
support (9).
2. Swing the footrest inwards until it clicks in position.
3.6.5 Footplate of B06
Angle
To change the angle of the footplate (10):
1. Loosen star knob (11) of toothed clamp (12) a few turns.
2. Turn the footplate up/down and hold it in desired position.
3. Tighten star knob (11).
4. Repeat this for the second footplate.
5. Make sure that both footplates are firmly secured.
3.6.6 Leg rests BZ7-BZ8
1. Loosen the lever (13) at the rotation point.
2. Adjust the angle of the leg rest by lifting/lowering the
footplates (between 100° - 190°).
3. Retighten the lever (13) firmly by hand.
4. Repeat this for the second leg rest. Make sure that
both leg rests are firmly secured.
3.6.7 Leg rest BZ10
Fold the footplate (14) up to make room for passage.