514920
8
Zoom out
Zoom in
Previous page
1/28
Next page
Timix
2021-05
Before use
6
EN
NL
4. If luggage and passenger compartments are not separated or enclosed, fasten the wheelchair
frame securely to the vehicle using the 6-points strap-tie-down system (see Figure 1).
2.4.4 Transport by vehicle, as seat for user
The wheelchair has passed the crash test of ISO 7176-19: 2008 and, as such, has been
designed and tested for use only as forward-facing seat in a motor vehicle.
The wheelchair is tested dynamically with the ATD (anthropomorphic test device) using a 6-
points strap-tie system and a 3-point occupant-restraint system. Nevertheless, the user
should preferably be transferred to one of the seats inside the vehicle and use the vehicle’s
restrain system. The wheelchair should be stored as luggage in a separate (cargo)
compartment, see §2.4.3 .
Risk of injuries and damage
Use wheelchair's pelvic belt and the applicable three-points belt in the vehicle to prevent head
and chest impacts with the vehicle.
Do not use postural supports to restrain the user in the vehicle unless they are labelled as being
in accordance with the requirements specified in ISO 7176-19:2008.
Following involvement in any type of vehicle collision, have your wheelchair inspected by the
specialist dealer or manufacturers representative before reuse.
Securing the wheelchair
1. Make sure that the vehicle has a suitable wheelchair 6-points strap-tie-down and occupant-
restraint system conform ISO 10542, and that both systems are not frayed, contaminated,
damaged or broken.
2. Use the operating console to return your wheelchair to stable position, see §3.5.
3. Remove all mounted accessories such as trays and respiratory equipment and secure them
in a safe place. If not possible, secure them to the wheelchair but positioned away from the
occupant with energy-absorbing padding placed between tray and user.
4. Use a ramp to drive the wheelchair (with user) in the vehicle according to the instructions in
§3.2.1.
5. Position the user facing forward in the travelling direction, centrally between the tie-down rails
mounted in the floor of the vehicle.
6. Make sure that the user is sitting as upright as possible. If the user's condition prevents this,
carry out a risk assessment to evaluate the user's safety during transit.
7. Turn the operating console OFF and make sure that the free-wheel lever is in braking mode,
see §3.4.
8. The location of each securement point on the wheelchair is marked with the
following symbol:
9. Verify that the tiedown end-fitting is compatible with the wheelchair securement points.
10. Mount the front securement straps according to the instructions of the strap-system
manufacturer at the indicated place (figure 1).
11. Turn free-wheel lever in free-wheel position and roll the wheelchair backwards to pull the front
straps tight, see §3.4.
12. Mount the back securement straps according to the instructions of the strap-system
manufacturer at the indicated place (figure 1).
13. Turn free-wheel lever back in braking position, see §3.4.
WARNING
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vermeiren Timix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vermeiren Timix in the language / languages: English as an attachment in your email.

The manual is 1.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vermeiren Timix

Vermeiren Timix User Manual - German - 28 pages

Vermeiren Timix User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info