797981
15
Zoom out
Zoom in
Previous page
1/32
Next page
Springer
2014-10
Page 13
2.12.1 Preparing the electric wheelchair for use
When you use your electric wheelchair for the first time, make sure that it is standing on level
ground. All wheels must be in contact with the ground.
1. Make sure that the motor is engaged and the contact is off.
2. Adjust the wheelchair best suited for yourself.
3. Set the operator control in the most comfortable position.
4. Sit down on the seat and verify that both armrests have been adjusted so your
forearms are folded down.
5. Put your wheelchair on with the "ON/OFF" button from the operator control.
Now put the speed control on the operator control to the minimum position. Your electric
wheelchair is now ready for use.
2.12.2 Handling after usage
Before getting off from your electric wheelchair, make sure that all four wheels touch the
ground simultaneously.
Push on the "ON/OFF" button from the operator control, the display of the operator control
goes out.
2.12.3 Parking the electric wheelchair
Once your electric wheelchair has been turned off, no command can be sent to the driving
system. Always park your electric wheelchair on sites that are easy accessible and on
horizontal surfaces that the four wheels are touching the ground.
2.12.4 Operator controls
* DX2 controller or Shark controller
The instructions for use the operator control you can find in the separate user manals of the
operator controls that is included with your electrical wheelchair.
2.12.5 Adjusting operator control
The operator control's horizontal position can
be changed by loosening screw . The unit
can then be adjusted as desired, or removed.
Screw must then be retightened properly. If
screw is pulled to the side, the steering unit
can be turned to the side.
NOTE: Depending on the features of your
wheelchair, screw could also be located on
the side of the guide tube.
2.12.6 Connections for charger / program unit
L WARNING: Risk of injury - Check that all plugs (battery charger and
programming unit) are removed before setting the wheelchair in motion.
The socket for connecting the charger supplied is located on the
front of the control unit. Here, too, is the connnection for the
programming unit, which should only be connected and used by
authorised persons who have been trained to program it (Vermeiren
personnel).
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vermeiren Springer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vermeiren Springer in the language / languages: English as an attachment in your email.

The manual is 1.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vermeiren Springer

Vermeiren Springer User Manual - German - 32 pages

Vermeiren Springer User Manual - French - 36 pages

Vermeiren Springer User Manual - Italian - 36 pages

Vermeiren Springer User Manual - Polish - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info