514971
22
Zoom out
Zoom in
Previous page
1/136
Next page
SCOOTERS Instruction Manual
Last updated: 2012-04
7
L
When mounting a tyre, make sure that no objects or body parts are pinched between the tyre
and the rim, since that could cause damage and/or injury.
L
Only an expert can guarantee correct assembly. Work not done by your specialist dealer,
would void any warranty claims.
L
When inflating the tyres, always check that the pressure is correct. The correct pressure is
given on the tyre walls.
L
Use only inflating equipment which complies with regulations and indicates the pressure in
bar. We do not accept any liability for damage caused by using inflation equipment not
supplied by the manufacturer.
DISASSEMBLING & ASSEMBLING
The chassis – situated below the seat and arm rests – can also be taken apart. Proceed as follows:
Switch the scooter off
Remove the seat (see “Seat” chapter).
Lift off the rear plastic cover (held in place by Velcro fasteners).
L
Bear in mind that the cables of the rear lights are connected to the plastic cover. Unplug the
plugs before entirely removing the plastic cover.
Unplug all battery plugs (not the pole connectors) and all cable plug- and socket connections.
Loosen the straps used to fasten the batteries in place.
Lift the batteries out.
The following diagram illustrates how the front and rear parts of the chassis are connected
(diagram K):
Pull out the safety pins.
Pull apart the front and rear frames.
To reassemble, please proceed as follows (diagram K):
Insert the supports of the front and rear frames into each other in such a way that the holes for the
safety pins are in line.
Push the fastening pins into the support holes as far as they will go.
Reconnect the plugs linking the front and rear parts of the frame (plugs of the same color go
together).
Put the batteries back in and connect to the battery plugs (plugs of the same color go together,
diagram J).
Use the straps to tighten the batteries in such a way that they won’t move, even during drives.
J
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vermeiren L3-Carpo 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vermeiren L3-Carpo 3 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vermeiren L3-Carpo 3

Vermeiren L3-Carpo 3 User Manual - Dutch - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info