798012
17
Zoom out
Zoom in
Previous page
1/120
Next page
Interval, Interval 120cm, Interval 140cm
2016-08
Page15
3.3.3 Head part / foot-end
1. Fit the supports for the headrest and the foot-end by means of the screws and
washers provided (preparatory assembly).
2. Insert the wooden uprights in the end tubes of the slatted frame and secure them
with the fixing screws.
3. Push the guide rails for the side railings with the sharp edge pointing upwards into
the guide rails of the head and foot sections until fully engaged.
3.3.4 Wooden side railings
A. Insert the short bolt rails (1) on the right and left in the upper wooden slat. Insert the
long bolt rails (2) right and left in the lower wooden slat.
Insert the long bolt rails (2) in the wooden slat in the sliding rail for the head and
foot section one by one and secure them by inserting the rails until the upper end is
inserted and clicks. On one side release this rail again until the tip by pressing the
position locking button (5) and pulling the upper wooden slat gently upwards.
Let the bolt rails (2) fall from the sliding rail once more until the tip of the rail is just
barely in the guide. The short bolt rail (1) can now be inserted together with the
wooden slat between the walls of the long bolt rails and the entire bolt rail system (1)
+ (2) can be placed in the relevant sliding rail (4) by pulling upwards when grasping
only the upper wooden slat and then locking the structure in position.
B. Insert the locknuts (6) and tighten them manually.
1 = Short bolt rails
2 = Long bolt rails
3 = Wood slats (2 pieces each side)
4 = Sliding rail
5 = Position locking button
6 = Locknut
1 = Support for headrest / foot-end
2 = Fixing screws
3 = Sliding rail
4 = Guiding rail for side railings
5 = Arresting knob
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vermeiren Interval at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vermeiren Interval in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 7.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info