797989
14
Zoom out
Zoom in
Previous page
1/96
Next page
2217, 2219
2015-03
Page12
Assembly:
L WARNING: Risk of injury - Check that the pressure is correct.
L CAUTION: Risk of injury - Make sure that no objects or body parts are pinched between
the tyre and the rim when mounting a tyre.
Place the rim belt in position over the air valve
before inserting it into the rim. Then the rim belt
can be pulled over easily. Check that all spoke
heads are covered (a rim belt is not required in
the case of a plastic rim).
Push the tyre over the edge of the rim, starting
behind the air valve. Inflate the tube slightly until
it is round, and place it inside the tyre.
If the tube fits snugly inside the tyre without any
folds (in the case of folds: let out some air), then
the upper side of the tyre can be pressed lightly
onto the rim with both hands, starting at the air
valve.
Check all around on both sides that the tube is not pinched between the rim and the edge of
the tyre. Lightly push the air valve inwards and pull it out again to make sure that the tyre is
positioned properly in the region of the air valve.
To ensure that the wheel is inflated correctly, admit only so much air initially that the tyre can
still be easily pushed inwards by using your thumbs. If the check-lines are equidistant from
the edge of the rim on both sides of the tyre, then the tyre is centered properly. If not - let out
the air and position the tyre afresh. Now the tyre can be inflated to its full operating pressure
(note the maximum) and the valve cap should be replaced.
Only an expert can guarantee correct assembly. Work not done by your specialist dealer,
would void any warranty claims.
When inflating the tyres, always check that the pressure is correct. The correct pressure is
given on the tyre walls.
Use only inflating equipment which complies with regulations and indicates the pressure in
bar. We do not accept any liability for damage caused by using inflation equipment not
supplied by the manufacturer.
4 Maintenance
For the maintenance manual of the tricycles refer to the Vermeiren website:
www.vermeiren.be.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vermeiren Freedom 2217 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vermeiren Freedom 2217 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 9.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info