Manual Vermeiren Controleunit DX2 Basic (page 12 of 20) (English)

514914

Zoom out

Zoom in

1/20

DX2 Operator control

vD - 2013-04

Adjust function

Display

CAUTION: Risk of injury or damage Make

sure that no objects and/or persons are

inside the swinging range of the adjust

functions, since this could cause damage

and/or injury.

The only functions displayed in the menu selection and

the centre of the display are those which exist on your

wheelchair and have been enabled.

For your safety the adjust functions can only be

activated when all four wheels of the wheelchair are

standing still. The driver programs are disabled

while the adjust functions are active.

Seat inclination

Angle of backrest

Leg support left

Leg support right

Leg supports

simultaneous

Lift column

Set time

Select the program function using the field

selection button (9) and the display will show the

menu for the special functions.

Select left/right with the joystick or the menu

selection button (10) until the time function you

want appears in the centre of the display.

If you want to set the time, confirm by moving the

joystick upwards.

The time digit waiting to be set flashes. To change

other digits, you can select left/right with the

joystick or use the menu selection button (10).

To adjust the digits, select upwards with the

joystick.

To save the new time, confirm by moving the

joystick downwards.

To switch back to the driving program, select the

drive profile button (8) in drive mode.

By default, the factory sets the time to be visible in the status display. To change this option, proceed

as follows:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vermeiren Controleunit DX2 Basic in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vermeiren Controleunit DX2 Basic

Vermeiren Controleunit DX2 Basic User Manual - Dutch - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vermeiren Controleunit DX2 Basic Manual

Product: