658530

Vermeiren Carpo 3 Manual

22
Zoom out
Zoom in
Previous page
1/136
Next page
Instruction manual Carpo 3 / Carpo 4
Last updated: 2017-02
9
The following diagram illustrates how the front and rear parts of the chassis are connected
(fig J):
Pull out the safety pins.
Pull apart the front and rear frames.
To reassemble, please proceed as follows (fig J):
Insert the supports of the front and rear frames into each other in such a way that the holes for the
safety pins are in line.
Push the fastening pins into the support holes as far as they will go.
Reconnect the plugs linking the front and rear parts of the frame (plugs of the same color go
together).
Put the batteries back in and connect to the battery plugs (plugs of the same color go together,
diagram I).
Use the straps to tighten the batteries in such a way that they won’t move, even during drives.
L Always turn the scooter off before disassembling it.
L Be careful not to cut or bruise yourself with the cables during assembling or disassembling.
TROUBLESHOOTING
The following list will assist you with the troubleshooting of your scooter.
Problem Cause
The scooter refuses to go once started.
No indication of load level
Key not in place or switched on.
Battery plug not connected (batteries not making
contact).
Thermal safety fuses disengaged.
Batteries defective (totally discharged).
Defective control unit.
Electronic box defective.
Loom of cables defective.
The scooter refuses to go once started.
Load level insufficient.
Motor/gears in neutral.
Potentiometer of the rocker meter defective/loose
Magnetic brake defective
Motor defective.
Electronic box defective.
Thermal safety fuses disengage.
Motor worked too hard (see “Technical details”).
Thermal safety fuses defective.
Batteries cannot be charged.
Batteries not fitted correctly.
ON/OFF switch of the battery box not switched on.
Loading socket defective
Wrong charger.
Loading device defective
J
1
2
3
1 = Rear frame
2 = Front frame
3 = Safety pin
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vermeiren Carpo 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vermeiren Carpo 3 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 6,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info