4 Assembly and adjustments
4.1 Assembly
1.
Slide the handgrips in the front frame.
2.
If needed, adjust the cables connected
to the brakes.
3.
Adjust the handgrips to the desired
height (see §4.2).
4.
Mount the plastic part (1) if not
mounted on the rollator after delivery.
Push the part (1) gently on the rollator
tubes with the hooks. It is also possible
to remove and remount it for cleaning
or maintenance.
4.2 Height adjustments
Risk of falling
• Firmly fix the handgrips before using
the rollator.
• Do not exceed the minimum or
maximum adjustment as indicated on
the handgrips. Your rollator will not be
stable anymore.
• Use the pushing handgrips
only parallel to the walking
direction of the rollator.
The rollator can be altered in height by
adjusting the handgrips:
1. Unlock/release the lever (2) on the
side.
2. Slide the handgrip (3) up/down in the
frame tube (4) to the desired height.
3. Lock the handgrip again firmly.
4. Repeat for the other handgrip.
Make sure that both handgrips have been
set to the same height.
4.3 Adjusting the brakes
The force of the brakes can be adjusted by
loosening/tightening the screw (5) on the
back of the brake lever.
