629193

Verizon FiOS 9100EM Manual

15
Zoom out
Zoom in
Previous page
1/211
Next page
030-300554 Rev. A 14 June 2008
Verizon FiOS Router
(
Model 9100EM
)
User Guide
5.1 Connecting Your Router to Your Broadband (Internet) Service
1. Connect one end of your coaxial cable to the coax connection on you wall. Connect the other end of the coaxial
cable to the connector marked Coax on the Router.
2. Connect the power supply cord to the power connector marked 12 VDC on the back of the Router. Plug the other
end of the power supply into an AC wall socket, and then turn on the Router by pressing the Off/ON switch on
the back of the Router.
3. Check to see if the Router’s POWER LED is solid green. This indicates that the Router is powered on.
4. Check to see if the Router’s Coax WAN LED is solid green. This means the COAX connection is functioning
properly. (Note: Your Coax WAN Led may also be amber which is acceptable)
Now that you have connected your Router to your broadband service and turned on the Router, you can connect
Ethernet and Wireless devices to the Router, allowing for Internet connection throughout your home without
disrupting your cable or satellite television services. Refer to the following sections for instructions on connecting
devices to your Router:
• Section 5.2 explains how to connect Ethernet devices to your broadband Router.
• Section 5.3 explains how to connection Wireless devices to your broadband Router.
5.2 Connecting Ethernet Devices to Your Router
To connect PCs to your Router using 10/100-BaseT Ethernet installation, please follow the steps below:
1. Connect your Router to your broadband service as explained in section 5.1.
2. Connect the yellow Ethernet cable (provided with your kit) from any one of the four Ethernet jacks marked 1, 2,
3, 4 on the back of the Router to the Ethernet port on your computer. Turn on the computer.
NOTE: Use any of the four LAN Ethernet jacks on the Router’s rear panel; each jack serves as an Ethernet
switch. Repeat this step to connect up to three additional PCs to the Router.
3. Check to see if the Router’s POWER LED is solid green. This indicates that the Router is powered on.
4. Check to see if any of the Router’s ETHERNET LEDs (1,2,3,4) are solid green. Solid green indicates that the
Ethernet connection is functioning properly. Check the ETHERNET LED for each Ethernet jack to which you
are connected at the rear of the Router.
5. Check to see if the Router’s COAX WAN LED is solid green (or flashing amber). This means the Coax
connection is functioning properly.
6. After you have logged on to you account and established an Internet connection, as explained later in this
document, check to see if the Router’s INTERNET LED is solid green. Solid green indicates that the Internet
link has been established.
Congratulations! You have completed the steps to connect Ethernet devices to your Router. Now proceed to section 6 to
access your Router’s Web pages.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Verizon FiOS 9100EM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Verizon FiOS 9100EM in the language / languages: English as an attachment in your email.

The manual is 11,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info