714731

Veritas Sarah Manual

68
Zoom out
Zoom in
Previous page
1/82
Next page
66
Attention:
Removing the presser foot
Attaching the presser foot
Removing and Attaching the presser
foot shank
Attaching the edge/ quilting guide
Turn power switch to off ("O") when
carrying out any of the above operations!
Raise the presser foot using the presser
foot lifter.
Raise the lever (e) and the foot disengages.
(1)
Lower the presser foot shank (b) using the
presser foot lifter, until the cut-out (c) is
directly above the pin (d). (2) The presser
foot (f) will engage automatically.
Raise the presser bar (a) with the presser
foot lifter.
Removing and Attaching the presser foot
shank (b) as illustrated. (3)
Attach the edge/quilting guide (g) in the
slot as illustrated. Adjust as needed for
hems, pleats, quilting, etc. (4)
Attention :
Enlever le pied-de-biche
Attacher le pied-de-biche
Enlever et attacher la tige du pied-de-biche
Attacher le bord/ guide de matelassage
Mettre l'interrupteur en mode arrêt ("O")
lorsque vous effectuez une des opérations
ci-dessus !
Relever le pied-de-biche à l'aide du releveur de
pied-de-biche.
Relever le levier (e) et le pied se libère. (1)
Baisser la tige du pied-de-biche (b) à l'aide du
releveur de pied-de-biche jusqu'à ce que le
découpage (c) soit directement au-dessus du
porte-bobine (d). (2) Le pied-de-biche (f) se
bloquera automatiquement.
Relever la barre du pied-de-biche (a) à l'aide du
releveur de pied-de-biche.
Enlever et attacher la tige du pied-de-biche (b)
comme illustré. (3)
Attacher le bord/guide de matelassage (g) dans
l'emplacement comme illustré. Ajuster comme
le nécessitent les ourlets, les plis, le
matelassage, etc.
(4)
Waarschuwing:
Persvoet verwijderen
Persvoet bevestigen
Verwijderen en bevestigen van de
persvoetschacht
Bevestigen van de geleider voor
doorstikken/quilten
Zet de machine uit, dus de aan/uitknop op
("O"), als u een van onderstaande
werkzaamheden gaat verrichten.
Zet de persvoet omhoog met de persvoetlichter.
Duw de hendel omhoog (e) en de voet komt
los. (1)
Laat de persvoetschacht (b) zakken met de
persvoetlichter, totdat de inkeping (c) vlak
boven de pen (d) staat. (2) De persvoet (f) klikt
vanzelf vast.
Zet de persvoetstang (a) omhoog met de
persvoetlichter.
U kunt de persvoetschacht (b) verwijderen en
bevestigen zoals aangegeven is op de
afbeelding. (3)
Bevestig de geleider voor doorstikken/quilten
(g) in de gleuf, zoals aangegeven is op de
afbeelding. Pas de afstand naar wens aan voor
zomen, plooien en doorstikken enzovoort. (4)
Persvoet verwisselen
Changer le pied-de-biche
Changing the presser foot
FR
NL
EN
… 68 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Veritas Sarah at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Veritas Sarah in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info