714725

Veritas MyJanis Edition Manual

62
Zoom out
Zoom in
Previous page
1/76
Next page
60
Attention:
Turn power switch to off ("O") when carrying
out any of the above operations!
Removing the presser foot
Raise the presser foot using the presser
foot lifter.
Raise the lever (e) and the foot
disengages. (1)
Attaching the presser foot
Lower the presser foot shank (b) using the
presser foot lifter, until the cut-out (c) is
directly above the pin (d). (2) The presser
foot (f) will engage automatically.
Removing and Attaching the presser
foot shank
Raise the presser bar (a) with the presser
foot lifter.
Removing and Attaching the presser foot
shank (b) as illustrated. (3)
Attaching the edge/ quilting guide
Attach the edge/quilting guide (g) in the
slot as illustrated. Adjust as needed for
hems, pleats, quilting, etc. (4)
Attention :
Mettre l'interrupteur en mode arrêt ("O")
lorsque vous effectuez une des opérations
ci-dessus !
Enlever le pied-de-biche
Relever le pied-de-biche à l'aide du releveur de
pied-de-biche.
Relever le levier (e) et le pied se libère. (1)
Attacher le pied-de-biche
Baisser la tige du pied-de-biche (b) à l'aide du
releveur de pied-de-biche jusqu'à ce que le
découpage (c) soit directement au-dessus du
porte-bobine (d). (2) Le pied-de-biche (f) se
bloquera automatiquement.
Enlever et attacher la tige du pied-de-biche
Relever la barre du pied-de-biche (a) à l'aide du
releveur de pied-de-biche.
Enlever et attacher la tige du pied-de-biche (b)
comme illustré. (3)
Attacher le bord/ guide de matelassage
Attacher le bord/guide de matelassage (g) dans
l'emplacement comme illustré. Ajuster comme
le nécessitent les ourlets, les plis, le
matelassage, etc. (4)
Waarschuwing:
Zet de machine uit, dus de aan/uitknop op
("O"), als u een van onderstaande
werkzaamheden gaat verrichten.
Persvoet verwijderen
Zet de persvoet omhoog met de persvoetlichter.
Duw de hendel omhoog (e) en de voet komt
los. (1)
Persvoet bevestigen
Laat de persvoetschacht (b) zakken met de
persvoetlichter,totdat de inkeping (c) vlak boven
de pen (d) staat. (2) De persvoet (f) klikt vanzelf
vast.
Verwijderen en bevestigen van de
persvoetschacht
Zet de persvoetstang (a) omhoog met de
persvoetlichter.
U kunt de persvoetschacht (b) verwijderen en
bevestigen zoals aangegeven is op de
afbeelding. (3)
Be v e st i g e n van d e gele i d e r voor
doorstikken/quilten
Bevestig de geleider voor doorstikken/quilten
(g) in de gleuf, zoals aangegeven is op de
afbeelding. Pas de afstand naar wens aan voor
zomen, plooien en doorstikken enzovoort. (4)
Persvoet verwisselen
Changer le pied-de-biche
Changing the presser foot
FR
NL
EN
… 62 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Veritas MyJanis Edition at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Veritas MyJanis Edition in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info