714724
45
Zoom out
Zoom in
Previous page
1/54
Next page
3 Surjet à fils
Pour réaliser un surjet à fils de
3 à 5 mm de large, il faut retirer
l'aiguille de gauche. Puis, enfiler
les deux boucleurs ainsi que
l'aiguille de droite.
Pour réaliser un surjet à 3 fils de
5 à 7 mm de large, il faut retirer
l'aiguille de droite. Puis, enfiler les
deux boucleurs ainsi que l'aiguille
de gauche.
3-Réalisation d'un oulet.
Positionner la manette sur
" R ". Veuillez vous référer aux
indications page 30.
Indication:
Selon la qualité de l'ouvrage ou
des fils employés, il peut être
parfois indispensable d'adapter
les tensions de fil.
Réglage:
Point: 3-Réalisation d'un oulet
Aiguille: à droite
Tension de fil:
Fil d'aiguille: 3
Fil du boucleur
supérieur: 4
Fil du boucleur
inférieur: 6
Longueur de point: 1.5
Entraînement:
(selon la qualité différentiel du
tissu)
Découdre une couture
Couper les boucles avec des
ciseaux pointus.
Tirer sur les fils d'aiguille, ainsi la
couture se libère.
Applications pratiques
Overlock a 3 fili
Per realizzare overlock a 3 fili, di
ampiezza compresa fra 3-5 mm,
togliete l'ago sinistro, Infilate
entrambi i crochet e l'ago
destro.
Per overlock a 3 fili, di ampiezza
compresa fra 5-7 mm, togliete
l'ago destro. Infilate entrambi i
crochet e l'ago sinistro.
Bordo arrotolato a 3 fili.
Mettete la leva sulla posizione
" R " ( Vedi a pagina 30 )
Nota:
In base al tipo di tessuto e di filo
utilizzati può essere necessario
regolare le tensioni.
Impostazioni:
Punto: Bordo arrotolato a 3 fili
Ago: destro
Tensioni:
Ago: 3
Crochet superiore: 3
Crochet inferiore: 6
Lunghezza punto: 1.5
Trasporto differenziale: N
(a seconda del tessuto)
Per sfilare I punti
Tagliare i cappi con delle forbici
affilate.
Tirare il filo dell'ago. I punti si
disferanno.
Esempi di cucito
3 thread overlock
For a 3-5 mm wide 3 thread
overlock, remove the left needle.
Thread both loopers and then
the right needle.
For a 5-7 mm wide 3 thread
overlock, remove the right
needle.
Thread both loopers and then
the left needle.
3 thread roll hem
Switch the lever to “ R “.
See page 29.
Note:
the tensions may need to be
adjusted depending on the type
of fabric or thread being used.
Setting:
Stitch: 3 thread roll hem
Needle: right
Tensions:
Needle:
Upper looper: 4
Lower looper: 6
Stitch length: 1.5
Differential feed: N
(depending on fabric)
Unpicking seams
Cut the loops with sharp
scissors.
Pull the needle thread and the
stitches will come undone.
Practical sewing
44
3
N
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Veritas Melanie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Veritas Melanie in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info