714715

Veritas Bessie Manual

9
Zoom out
Zoom in
Previous page
1/172
Next page
8
Important Safety Instructions
When using an electrical appliance, basic safety instructions
should always be followed. Please read through this user manual
thoroughly before using your sewing computer and keep these
instructions for your reference.
DANGER – To reduce the risk of electrical shock:
1. The sewing computer should never be left unattended when
plugged in.
2. Always unplug this appliance from the electric outlet imme-
diately after using and before cleaning.
WARNING – To prevent burns, fire, electric shock or personal
injury:
1. Electrical appliances are no children’s toys. Children must be
supervised to prevent them from playing with the sewing
computer. Increased caution is called for if the sewing com-
puter is used by children or in the vicinity of children.
2. This sewing computer must only be used as described in this
manual. Accessories must only be used if they comply with
the descriptions in this manual and the manufacturers rec-
ommendations, otherwise the appliance might be damaged.
3. Never use the sewing computer if a cable or connector is
damaged, not working properly or fault-free, after it being
dropped or damaged or after it coming into contact with
water. In every one of those cases, please bring the sewing
computer to the nearest authorized specialty retailer or to
the service centre to have it checked and repaired resp. to
adjust electrical or mechanical parts.
4. Never use the sewing computer while the ventilation open-
ings are blocked. Keep the ventilation openings of the appli-
ance as well as the foot pedal free from fuzz, dust and cloth
waste.
5. Keep your fingers away from all moving parts. Increased cau-
tion is called for in the vicinity of the sewing needle. Moving
parts such as needle, presser foot lifter, etc. are especially
dangerous for hands and fingers. The sewing area is to be
watched constantly while the machine is in use. Adjustments
on the machine, f.e. changing of the needle, threading, insert-
ing the bobbin or changing the foot are only to be made while
the machine is switched off (Main switch set to „O“).
6. Always disconnect the sewing computer from the power
when maintenance is performed according to the manual,
f.e. when the cover is removed, the appliance is oiled resp.
cleaned or if the light bulb is changed. This means pulling the
power plug. Also pull the power plug when the appliance is
moved or out of use.
7. To switch off, set the main switch to „O“ and pull the plug.
Always pull the plug from the socket when leaving the ma-
chine unsupervised to prevent injuries caused by accidental
activation.
8. Do not pull on the cord to disconnect the plug from the sock-
et. Always use the plug itself, not the cord, to disconnect.
9. The power cord must not be left to hang over corners or
edges or be squashed (Risk of electric shock!). Place the cord
in such a way that nobody can trip over it.
10. Always use a correct needle plate cover that has been includ-
ed with this sewing computer. Using the wrong needle plate
cover can cause the needle to break.
11. Do not use any crooked or broken needles.
12. Always use the appliance on a dry, stable and level worktop.
Keep it clear from hot surfaces and open flame.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Veritas Bessie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Veritas Bessie in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 18,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info