714713

Veritas Amelia Manual

32
Zoom out
Zoom in
Previous page
1/158
Next page
31
LET OP: Zet de hoofdschakelaar altijd uit
(op “O” zetten) voordat het persvoetje wordt
geplaatst of verwisseld!
Het juiste persvoetje plaatsen /
persvoetje verwisselen

Persvoethouder plaatsen
1. Naaldstang (a) door omhoog zetten van de persvoet-
hevel omhoog zetten;
2. persvoethouder (b) zoals afgebeeld plaatsen.
Persvoet plaatsen
1. laat de persvoethouder (b) zakken tot de uitsparing (c)
direct boven de pen van de persvoet ligt.
2. Druk de bevestigingshevel (d) omhoog.
3. De persvoethouder (b) gaat omlaag en het persvoetje
(f) wordt automatisch vergrendeld.
Persvoet verwijderen
1. Persvoet omhoog zetten. Bevestigingshendel (e)
omhoog drukken en de persvoet komt los.
Randgeleider plaatsen
1. Randgeleider (g) zoals afgebeeeld door de opening
schuiven. Instellen op de gewenste breedte van de
zoom, de plooi etc.
ATTENTION: Turn power switch to off („O“)
position when changing the presser foot.
Attaching / changing the presser foot

Attaching the presser foot holder
1. Raise the presser foot bar (a) by raising the presser
foot lifter.
2. Attach the presser foot holder (b) as illustrated.
Attaching the presser foot
1. Lower the presser foot holder (b) until the cut-out (c)
is directly above the pin.
2. Raise the lever (d).
3. Lower the presser foot holder (b) and the presser
foot (f) will engage automatically.
Removing the presser foot
1. Raise the presser foot. Raise the lever (e) and the
foot will disengage.
Attaching the edge / guilting guide
1. The edge / quilting guide (g) can be attached as illus-
trated. Adjust as needed for hems, pleats, quilting,
etc.
ATTENTION : Eteignez toujours l’interrupteur
(en le plaçant sur « O ») avant de monter ou
remplacer le pied de biche !
Montage du pied de biche approprié / remplace-
ment du pied de biche

Montage du support du pied de biche
1. Mettez la tige du pied de biche (a) en position haute
en soulevant le levier du pied de biche.
2. Montez le support du pied de biche (b) comme indiqué
sur l’illustration.
Montage du pied de biche
1. Abaissez le support du pied de biche (b) jusqu’à ce que
l’évidement (c) soit directement au-dessus de la tige
du pied de biche.
2. Soulevez le levier de fixation (d).
3. Abaissez le support du pied de biche, le pied de biche
(f) s’enclenche automatiquement.
Démontage du pied de biche
1. Placez le pied de biche en position haute. Soulevez le
levier de fixation (e) et le pied de biche se détache.
Montage du guide piqûre
1. Poussez le guide piqûre (g) à travers l’ouverture
comme indiqué sur l’illustration. Installez-le en fonc-
tion de la largeur souhaitée de l’ourlet, du pli, etc.
Pied de biche Presser Foot Persvoetje
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Veritas Amelia at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Veritas Amelia in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info