Manual Veripart VPVR170NFE (page 37 of 104) (English, German, Dutch, French)

806446

Zoom out

Zoom in

1/104

4. Clean

Clean the interior and all internal accessories with lukewarm water and some neutral soap

before rst use to remove the typical smell of a brand new appliance. Dry everything

carefully. Do not use solvents or abrasive powders; these will damage the coating.

5. Wait

Wait four hours before connecting the appliance so that the oil can ow back to the

compressor.

6. Switch on

Before plugging in the power cable, check that the voltage and frequency of the type plate

match your power supply network. The appliance must be earthed. The power cable is

supplied with an earthed plug for this purpose. If the socket is not earthed, connect the

appliance to a separate earth according to current regulations and consult a qualied

electrician. Insert the mains plug into the socket to start the compressor. After 1 hour, open

the freezer door. If the temperature in the freezer compartment is noticeably lower, this

indicates that the cooling system is operating normally.

7. Mounting accessories

- Adjustable shelves

The walls of the appliance are equipped with a series

of guide proles so that the shelves can be inserted if

desired.

- Installing the door compartments

To store food of different sizes, the door

compartments can be set to different heights. Proceed

as follows: gradually pull the compartment in the

direction of the arrows until it comes loose and put it

in the desired position.

8. Storing food

See Section 4 “Use”.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Veripart VPVR170NFE in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5.32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Veripart VPVR170NFE Manual

Product: