806446

Veripart VPVR170NFE Manual

32
Zoom out
Zoom in
Previous page
1/104
Next page
32
EN
CAUTION!
1.2 SAFETY INSTRUCTIONS: INSTALLATION
• The appliance is heavy. Take care when handling and wear protective gloves and closed
footwear.
• It is dangerous for persons other than authorised service technicians to carry out
maintenance on electrical components (plug, power cable, compressor, etc.) or to carry
out repairs with the cover plates removed. To avoid the risk of electric shocks, do not
attempt to repair this appliance yourself.
• If you detect any damage to the appliance or the power cable, do not connect the appliance
but contact the service department (see contact details on page 35).
• The power cable must be attached behind the appliance and must not be exposed or loose.
• Make sure that the power cable of the installed appliance is always easily accessible.
• This appliance requires a standard 220-240V 50Hz socket with 2-pole earthing. The
power cable of this appliance is equipped with a 2-pole plug suitable for standard wall
sockets with earthing to minimise the risk of electric shocks.
• On rst installation (or after turning the door) wait at least four hours before connecting the
appliance to the power. This allows the oil to ow back into the compressor.
• Ensure that air can circulate around the appliance.
• Pull the plug out of the socket before carrying out any actions on the appliance (e.g. turning
the door).
• Incorrect use of the earthed plug may cause an electric shock.
• This appliance is not intended for use as a built-in freezer.
• The correct operation of the appliance can only be guaranteed if the specied temperature
range is respected. If, as a result of another installation, the correct ventilation requirements
are not met, the appliance
• will function correctly, but energy consumption may increase slightly.
• This appliance is not suitable for use with an inverter.
• Do not install the appliance near radiators, stoves, ovens or hobs.
• Do not install the appliance in direct sunlight.
• Do not install this appliance in spaces that are too damp or too cold.
• Do not expose the appliance to rain.
• The total volume of the space in which the appliance is installed divided by the amount
of freezerrant of the appliance must not be less than 8 g/m³. The amount of freezerrant
contained in the appliance can be found on the type plate.
• The lamp supplied with this appliance is only for use in this appliance and is not intended for
other applications.
• The appliance may not operate optimally if it is in a place where the ambient temperature is
below the minimum or above the maximum of the temperature range for which the appliance
is designed for a longer period of time. Please refer to the “Climate Range” table below.
DANGER!
Risk of re / ammable materials.
!
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Veripart VPVR170NFE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Veripart VPVR170NFE in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info