Manual Veripart VPTMVR85 (page 42 of 116) (English, German, Dutch, French)

806448

Zoom out

Zoom in

1/116

1. Standing time

After the freezer is properly installed and well cleaned, do not switch

it on immediately. Wait to switch the freezer on only after more than 1

hour, so as to ensure its normal operation.

2. Cleaning

Conrm the accessory parts inside the freezer and wipe the inside

with a soft cloth.

3. Power-on

Insert the plug into the socket to start the compressor. After 1

hour, open the freezer door. If the temperature inside the freezer

compartment has dropped noticeably, the freezerration system is

working normally.

4. Storage of food

After the freezer has been running for a period of time, the internal

temperature of the freezer will be automatically controlled according

to the user’s chosen temperature setting. After the freezer is fully

cooled, you may load it with food, which usually needs 2~3 hours to

cool completely. In summer, when the outside temperature is high, it

takes more than 4 hours for food to be fully cooled (Try to open the

freezer door as little as possible before the internal temperature cools

down).

Warning!

• If the freezer is installed, make sure to check whether the ground

wire and leakage circuit breaker are normal. If vibration noises

are produced due to the freezer contacting the wall or if the wall

gets blackened by air convection around the compressor, move the

freezer away from the wall.

！

3.1 PREPARATION FOR USE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Veripart VPTMVR85 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Veripart VPTMVR85 Manual

Product: