806434
76
Zoom out
Zoom in
Previous page
1/120
Next page
75
FR
1. Débranchez la prise et videz
l’appareil.
2. Retirez le cache de la charnière,
les vis et la charnière supérieure.
Retirez la coiffe et les chevilles de
l’autre côté.
List of tools to be provided by the user
Cross screwdriver
Putty knife thin-blade
screwdriver
5/16 socket spanner
Masking tape
Parts to be used for door reverse
SN parts Quantity Notes
1Upper hinge 1
Pre-installed on the
refrigerator, still used
when door is reversed
2 Hinge cover 1
3Tapping
locking screw4
4Hole cap 1
5 Pin 2
6Lower hinge
assembly1
7 Leveling foot 1
Power o the refrigerator, and
remove all objects from the door
trays.
Dismantle the hinge cover, screws
and upper hinge, and remove the
hole cap and pins from the other
side.
Hinge cover
Upper hinge
Leveling foot
Install the door on the lower hinge assembly, and then install the
upper hinge, hinge cover, pins and hole cap in sequence.
Hinge cover Upper hinge
3.1 INVERSION DU SENS DE ROTATION DE LA PORTE
Pour retirer la porte, l’appareil doit être incliné vers l’arrière. Nous
conseillons de le faire avec deux personnes. Laissez reposer l’appareil sur
une surface solide pour éviter qu’il ne glisse pendant que vous retournez la
porte.
Conservez tous les éléments déposés pour remonter la porte ultérieurement.
Ne posez pas l’appareil à plat. Cela peut endommager le système de
refroidissement. Si l’appareil doit être basculé, attendez 4 heures avant de le
raccorder; l’huile aura ainsi le temps de retourner dans le compresseur.
Outils nécessaires :
Tournevis cruciforme
Tournevis plat
Clé à molette ajustable
Ruban de masquage
List of tools to be provided by the user
Cross screwdriver
Putty knife thin-blade
screwdriver
5/16 socket spanner
Masking tape
Parts to be used for door reverse
SN parts Quantity Notes
1Upper hinge 1
Pre-installed on the
refrigerator, still used
when door is reversed
2 Hinge cover 1
3Tapping
locking screw4
4Hole cap 1
5 Pin 2
6Lower hinge
assembly1
7 Leveling foot 1
Power o the refrigerator, and
remove all objects from the door
trays.
Dismantle the hinge cover, screws
and upper hinge, and remove the
hole cap and pins from the other
side.
Hinge cover
Upper hinge
Leveling foot
Install the door on the lower hinge
assembly, and then install the
upper hinge, hinge cover, pins and
hole cap in sequence.
Hinge cover Upper hinge
Couvercle de
charnière
Charnière
supérieure
La direction de la porte du congélateur ne peut pas être modiée et doit
rester en place.
ATTENTION!
!
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Veripart VPTMKV48W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Veripart VPTMKV48W in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5.79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info