806433
45
Zoom out
Zoom in
Previous page
1/116
Next page
EN
44
3. First remove the door, then remove the
lower-right hinge and the adjusting leg
on the left-hand side. Lay the door on a
soft surface to avoid scratches.
4. Now mount the right-hand hinge on
the left side of the refrigerator, and
the adjusting leg on the right side and
tighten everything.
5. Mount the door on the bottom hinge
and then mount the top hinge. Then
remount the hinge cover, pins and cap in
sequence.
List of tools to be provided by the user
Cross screwdriver
Putty knife thin-blade
screwdriver
5/16 socket spanner
Masking tape
Parts to be used for door reverse
SN parts Quantity Notes
1Upper hinge 1
Pre-installed on the
refrigerator, still used
when door is reversed
2 Hinge cover 1
3Tapping
locking screw4
4Hole cap 1
5 Pin 2
6Lower hinge
assembly1
7 Leveling foot 1
Power o the refrigerator, and
remove all objects from the door
trays.
Dismantle the hinge cover, screws
and upper hinge, and remove the
hole cap and pins from the other
side.
Hinge cover
Upper hinge
Leveling foot
Install the door on the lower hinge assembly, and then install the
upper hinge, hinge cover, pins and hole cap in sequence.
Hinge cover Upper hinge
List of tools to be provided by the user
Cross screwdriver
Putty knife thin-blade
screwdriver
5/16 socket spanner
Masking tape
Parts to be used for door reverse
SN parts Quantity Notes
1Upper hinge 1
Pre-installed on the
refrigerator, still used
when door is reversed
2 Hinge cover 1
3Tapping
locking screw4
4Hole cap 1
5 Pin 2
6Lower hinge
assembly1
7 Leveling foot 1
Power o the refrigerator, and
remove all objects from the door
trays.
Dismantle the hinge cover, screws
and upper hinge, and remove the
hole cap and pins from the other
side.
Hinge cover
Upper hinge
Leveling foot
Install the door on the lower hinge assembly, and then install the
upper hinge, hinge cover, pins and hole cap in sequence.
Hinge cover Upper hinge
List of tools to be provided by the user
Cross screwdriver
Putty knife thin-blade
screwdriver
5/16 socket spanner
Masking tape
Parts to be used for door reverse
SN parts Quantity Notes
1Upper hinge 1
Pre-installed on the
refrigerator, still used
when door is reversed
2 Hinge cover 1
3Tapping
locking screw4
4Hole cap 1
5 Pin 2
6Lower hinge
assembly1
7 Leveling foot 1
Power o the refrigerator, and
remove all objects from the door
trays.
Dismantle the hinge cover, screws
and upper hinge, and remove the
hole cap and pins from the other
side.
Hinge cover
Upper hinge
Leveling foot
Install the door on the lower hinge assembly, and then install the
upper hinge, hinge cover, pins and hole cap in sequence.
Hinge cover Upper hinge
Bottom
hinge
Adjustable
feet
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Veripart VPTMKK48W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Veripart VPTMKK48W in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info