Manual Veripart VPSS103 (page 23 of 36) (English, Dutch, French)

806410

Zoom out

Zoom in

1/36

• Place back the cover. Make sure it is properly attached.

Attention

• Only use the vacuum cleaner when all lters have been placed. If not, the suction power

could be reduced or the motor could be damaged.

• Torn or not properly sealing lters could damage the motor. When a lter is defective, it

must be replaced by a new original lter.

Cleaning the turbo brush

Hair and/or other dirt can remain in the rotating brush. Therefore,

regularly clean the turbo brush for an optimum use of the vacuum

cleaner.

• Make sure the vacuum cleaner is off and disconnect the turbo

brush from the vacuum cleaner.

• Unlock the catch at the bottom of the turbo brush with a coin or

at screwdriver.

• Fold out the catch.

• Now carefully pull the brush out of the turbo brush.

• Carefully cut the entangled threads or hairs from the brush.

• Clean the brush with lukewarm running water and allow the brush

to dry in the air.

• Place the brush back in the turbo brush.

• Fold in the catch and rotate it to the locked position with a coin or

at screwdriver.

Storage

After each use, place the vacuum cleaner back on the suspension bracket. Once the adapter

is connected and the connector is inserted into the connection of the vacuum cleaner, the

battery will charge. Once the battery is fully charged, remove the adapter from the socket

and the appliance.

ATTACHING THE SUSPENSION BRACKET

Use screws and plugs to attach the suspension bracket to the wall on a location near a socket

for the adapter.

• Hold the suspension bracket against the wall at the required position.

• Demarcate the two screw holes on the wall using a pencil.

• Use a drill to make two holes of at least 4 cm deep on the marks.

• Insert the plugs in the holes.

• Place the suspension bracket on the wall and fasten it with the screws.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Veripart VPSS103 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 4.64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Veripart VPSS103 Manual

Product: