Manual Veripart VPSS101 (page 22 of 36) (English, Dutch, French)

806412

Zoom out

Zoom in

1/36

6. MAINTENANCE

Regularly check the lters to prevent problems. Empty the dust reservoir when it is full and

clean or replace the lters when they are dirty.

Emptying the dust reservoir

It is recommended emptying the dust reservoir after each use. The

dust reservoir is full when the amount of dirt has reached the max

line. Remove the accessories prior to emptying the dust reservoir.

• Hold the vacuum cleaner above a waste bin and open the cover of

the dust reservoir by pressing the knob.

• The cover falls open. Gently shake the dust reservoir empty into

the waste bin and close the cover in such a way that it snaps in

place.

Cleaning the cyclone system and lters

First remove the accessories and empty the dust reservoir before cleaning the vacuum

cleaner. Clean the lters and cyclone system after each 4th time that the dust reservoir is

emptied.

• Press the knob to disconnect the dust reservoir and remove the dust

reservoir from the vacuum cleaner.

• The entire dust reservoir comes away from the vacuum cleaner.

Make sure you hold the dust reservoir upright to prevent the lter

and cyclone system from falling out.

• Remove the lter (a) and cyclone system (b and c) from the dust

reservoir.

• Clean the lter and cyclone system with lukewarm running water

and allow the components to dry in the air. Do not use cleaning

agents or brushes. It is possible that the lter does not return to its

original colour after cleaning. This discolouration does not have an

effect on its function.

• The cyclone system consists of two parts (b and c). In order to

clean the cyclone system thoroughly, you can dismantle the

cyclone system. Clean the parts with lukewarm running water. Do

not use cleaning agents or brushes. Allow the parts to dry in the

air.

• Re-assemble all parts when everything is fully dry and place them

back in the dust reservoir in reverse order.

Caution: the cyclone system ts in the dust reservoir in only one way.

• Properly connect the dust reservoir to the vacuum cleaner and make sure it snaps in place.

Cleaning the HEPA lter

• Unscrew the cover (d) of the air outlet and remove it.

• Remove the HEPA lter from the motor.

• Clean the HEPA lter with lukewarm owing water and allow the

lter to dry in the air for 24 hours. Do not use cleaning agents or

brushes.

• Only place the HEPA lter back once it is fully dry, or place a new

HEPA lter.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Veripart VPSS101 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 4.72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Veripart VPSS101 Manual

Product: