806422

Veripart VPSBSW177Z Manual

47
Zoom out
Zoom in
Previous page
1/132
Next page
46
EN
6. Installation of the appliance
• This appliance is not intended for use as a built-in refrigerator.
• Use the front adjusting legs to level the appliance. If the appliance is not
level, it may affect the performance of the gasket seal or even lead to a
failure of your appliance.
• It must be possible to disconnect the appliance from the mains power
supply. The plug must therefore be easily accessible after installation.
• Place the appliance on a rm and at surface (oor) so that it is
stable, otherwise vibrations and noise may occur. When placing the
refrigerator on oor coverings such as carpets, straw mats or polyvinyl
chloride (PVC), place a solid sheet or cover under the refrigerator to
prevent colour change due to heat dissipation.
• Before plugging in the power cable, check that the voltage and
frequency of the type plate match your power supply network. The
appliance must be earthed. The power cable is supplied with a contact
for this purpose. If the socket is not earthed, connect the appliance to a
separate earth according to current regulations and consult a qualied
electrician.
7. Mounting accessories: door compartments and shelves
To store food of different sizes, the door compartments can be set to
different heights. Proceed as follows: gradually pull the compartment in
the direction of the arrows until it comes loose and put it in the desired
position.
The walls of the refrigerator are equipped with a series of guide proles
so that the shelves can be inserted if desired. To remove the shelf, lift it
rst and then pull it out. To put the shelf back in place, push it into place
before lowering.
For the two-piece shelf, rst push back the rst part and then pull out the
second part.
Raise the rear edge of the shelf to prevent food coming into contact with
the wall lining. Hold the shelf rmly when removing or replacing it and
take care to avoid damage.
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Veripart VPSBSW177Z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Veripart VPSBSW177Z in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info