806407
24
Zoom out
Zoom in
Previous page
1/40
Next page
24
Cleaning or replacing the motor lter
The motor lter ensures no large dust particles can enter the engine. Clean the motor lter
every six months.
1. Grab the handle of the dust collector and press the button [b] to
release the dust collector. Lift the dust collector and set it aside.
2. Take out the motor lter [f] with your thumb and index nger from the
air inlet of the vacuum cleaner.
3. Clean the motor lter [f] under lukewarm water and let it air dry
completely. Do not use any cleaning agents or brushes.
4. Place the dry motor lter back in the air inlet.
5. Place the dust collector back on the vacuum cleaner. You will hear a
click when it is placed correctly.
Cleaning the cyclone system and the dust collector
When the dust collector and the cyclone system are very dirty, they can be cleaned under
lukewarm water.
1. Follow step 1, 2 and 3 of chapter Cleaning the cyclone lter.
2. Lift the cyclone system [g] out of the dust collector.
3. The dust collector [2] and the cyclone system [g] can be cleaned under
lukewarm water. Use a soft brush or sponge to remove tough dirt.
4. Dry the parts thoroughly and let them air dry at least for 24 hours to
ensure there is no more moist in the inside of the parts. Attention: using
the vacuum cleaner with damp parts can cause damage to the engine.
5. Place the cyclone system back into the dust collector. Make sure the
tab at the top ts in the notch of the dust collector.
6. Press the cyclone lter back in the dust collector.
7. Close the lid of the dust collector. You will hear a click when it is closed correctly.
8. Place the dust collector back on the vacuum cleaner. You will hear a click when it is placed
correctly.
Cleaning or replacing the HEPA lter
The HEPA lter cleans the air one last time before it leaves the vacuum
cleaner. Clean the HEPA lter at least once per six months or when it
is very dirty. Replace a damaged HEPA lter with a new original HEPA
lter.
Open the grid [h] that covers the HEPA lter by pushing the clip.
Pull the clip back and take out the HEPA lter [i].
Rinse the HEPA lter under lukewarm water and let it air dry
completely. Do not use any cleaning agents or brushes.
Put the HEPA lter back into place, when dry, or replace it by a new
one.
• Replace the grid. Make sure that the grid is properly placed.
f
g
2
i
h
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Veripart VPSB101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Veripart VPSB101 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 1.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info