806411

Veripart VPKK143W Manual

19
Zoom out
Zoom in
Previous page
1/53
Next page
36 37
INSTALLATION
LOCATION
Location
When selecting a position for your fridge you should
make sure the oor is at and rm, and the room is
well ventilated. Avoid locating your fridge near a heat
source, e.g. cooker, boiler or radiator. Also avoid
direct sunlight in out-buildings or sun lounges. If you
are placing your fridge in an out-building such as a
garage or annex ensure that the fridge is placed above
the damp course, otherwise condensation will occur
on the fridge cabinet. When working, the refrigerator
gives off heat to its surroundings. Therefore, at least
30mm of free space should be left on the top, more
than 100mm on both sides, and more than 50mm at
the back of the refrigerator.
Levelling the fridge
If the fridge is not level, the door and magnetic seal
alignment will be affected and may cause your fridge
to work incorrectly. Once the fridge is placed in its
nal location, adjust the leveling feet at the front by
turning them.
Cleaning before use
Wipe the inside of the fridge with a weak solution
of bicarbonate of soda then rinse with warm water
using a damp sponge or cloth. Wash the baskets and
shelves in warm soapy water and dry completely
before replacing in the fridge. The external parts of the fridge
can be cleaned with a non-abrasive detergent diluted in warm water.
Before plugging in YOU MUST:
Check that you have a socket which is compatible with the plug supplied with
the fridge. Check BEFORE switching on!
Do not switch on until four hours after moving the fridge. The
coolant uid needs time to settle. If the appliance is switched off at any time,
wait 30 minutes before switching back on to allow the coolant uid
to settle.
Before filling your fridge:
Before storing foods in your fridge, turn the fridge on and wait for 24 hours,
to make sure it is working properly and to allow the fridge to fall to the
correct temperature.
INSTALL DOOR HANDLE
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Veripart VPKK143W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Veripart VPKK143W in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0.89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info