738506
13
Zoom out
Zoom in
Previous page
1/122
Next page
ENEN 25
Display Function
6AUTO Switch Automatic operation on device on or off by briefly
touching the AUTO button
ON: AUTO in the display flashes continuously and device
automatically regulates the rotational speed depending on
the humidity in the room.
i
pre-set) flashes twice and then will show the meas-
ured humidity in the room in the HUMIDITY display 1.

the fan will switch off after approx. 60 seconds and
no rotational speed will appear in speed display 2. No air
humidification/air purification will take place.
OFF: AUTO in the display is lit continuously, and the device
runs at the set rotational speed 1 - 3.
Set desired humidity 30 – 70 %:
Hold AUTO-button for 3 seconds. The HUMIDITY 1 display

increments) using the - or + buttons 3. Hold AUTO-button
for 3 seconds again until the flashing in display HUMIDITY
1 and the humidity measured in the room is shown again.
CLEANING & MAINTENANCE
! Attention! Ensure that the device is switched off during any measures
and the switching power supply is disconnected from the outlet!
Display Measures
7WATER Remove upper housing. Fill lower housing with tap water up
to the WATERLINE marking. Place upper housing on lower
housing and put device in operation again.
i As soon as there is not enough water in the lower housing, the device
is switched off automatically and the WATER display appears. In the
HUMIDITY display 1, two lines will flash and the humidity in the room
is not shown.
To humidify and clean the room air continuously, we recommend
refilling the water in a timely manner.
8SERVICE Remove upper housing. Drain residual water from lower hous-
ing. Rinse lower housing and disk stack. Fill lower housing with
tap water up to the WATERLINE marking maximum and add the
Venta hygiene additive (for dosage see scale on rear of bottle). Re-
assemble the device. Touch SERVICE display 8
hold it for 3 seconds until it goes off.
i For flawlessly hygienic continuous operation, the SERVICE display
indicates a reminder every 14 days that this measure needs to be
carried out.
This measure can be carried out if required, even if the SERVICE
message is not shown. Afterwards, simply touch SERVICE display 8
and hold for 3 seconds. The next reminder will now be shown again in 14 days
with the SERVICE message
Any remaining liquid in the water tray and on the disk stack (white, green-yellow or
brown deposits or discolorations) do NOT impair the function of the device.
For the six-monthly cleaning, we recommend the Venta Cleaner. Please note the
instruction manual included with the Venta Cleaner.
87
24
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Venta LW15 Comfort Plus 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Venta LW15 Comfort Plus 2020 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish, Finnish as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info