488061

Venga VG CMM 1 Manual

11
Zoom out
Zoom in
Previous page
1/52
Next page
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
Fax +32 2 359 95 50
USING THE STICK MIXER (motor unit and metal leg)
• Ensure that the unit is unplugged.
• Attach the shaft to the motor housing in such a way that the release buttons of the motor
housing are aligned with the notches of the shaft and apply gentle pressure until it clicks
into place. Then use gentle hand pressure only to ensure that the shaft is fully tightened
onto the motor unit.
• Put the ingredients into the bowl or a suitable container (such as a mixing bowl or pan).
Do not overfill to prevent splashing.
• Plug the unit into a suitable mains socket.
• Hold the unit securely and press the on/off button. We recommend that the motor unit is
operated in short on/off pulses.
• When mixing liquids ensure the blade is fully immersed before switching on the appliance
to prevent splashing.
• Never remove the unit from the liquid until the blade has totally stopped spinning.
USING THE CHOPPER (motor unit, chopper and bowl)
• Ensure that the unit is unplugged.
• First place the blade in the bowl.
• Add ingredients to the bowl. Some hard foodstuffs (e.g. carrots, cheese and meat) will
need to be chopped before being put into the bowl. DO NOT OVERFILL THE BOWL.
• Attach the opening of the lid to the motor housing in such a way that the release buttons
of the motor housing are aligned with the notches of the lid and apply gentle pressure
until it clicks into place. Then pull lightly on the lid to ensure that it is fully tightened onto the
motor unit.
• Place the lid on the container respecting the positioning of its openings-out. If necessary,
turn the lid until it is correctly placed on the container, then make it turn very lightly. Check
the locking of the lid by pulling on it lightly.
• Plug the unit into a suitable mains socket.
• Hold the bowl securely with one hand, and the motor unit with your other hand.
• Press the on/off button.
• NEVER remove the motor unit and lid of the chopper from the bowl until the blade has
stopped spinning.
• Only use the lid of the chopper, blade and axle unit in the bowl provided.
USING THE WHISK (motor unit, whisk body and removable stainless steel whisk)
• Attach the whisk body to the motor housing in such a way that the release buttons of the
motor housing are aligned with the notches of the whisk body and apply gentle pressure
until it clicks into place. Then use gentle hand pressure only to ensure that the whisk body is
fully tightened onto the motor unit.
• Insert the whisk into the whisk body, making sure that it is tight.
• Press the on/off button.
• Do not touch the whisk while it is moving.
11 VG CMM 1 - 101216
Assembly page 11/52
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Venga VG CMM 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Venga VG CMM 1 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info