567745
25
Zoom out
Zoom in
Previous page
1/29
Next page
25
Wi-Q User’s Manual
Protection Circuitry
The subwoofer is equipped with protection circuitry to provide maximum performance and reliability. The
subwoofer is protected against:
Overdriving the speaker
Overdriving the amplifier
Overheating the amplifier
Excessive drop in power line voltage
If the protection circuitry is active, the unit may cycle on and off until operating parameters return to normal. Under
more serious conditions, the unit may shut off completely. Normal operation should return upon cooling, but you
may need to turn the power off and then on again to reset the unit.
The overdrive protection circuitry operates constantly without being audible under most situations.
If the subwoofer shuts down, reduce the volume setting and turn the subwoofer off until it cools down. The time
the subwoofer takes to cool down depends on the ambient room temperature, but typically it takes at least 10
minutes for the subwoofer to cool down and recover from a thermal shutdown.
Also, plug the unit into a different wall socket. Overloaded sockets or damaged home wiring circuits can cause
power voltage drops while the subwoofer is drawing high power levels. This condition can result in the subwoofer
shutting down intermittently.
Service
DO NOT ATTEMPT TO SERVICE THE SUBWOOFER OR TRANSMITTER YOURSELF beyond what is described in
this owner’s manual.
ONLY USE QUALIFIED SERVICE TECHNICIANS TO REPAIR DAMAGED PARTS. Service the subwoofer or
transmitter using qualified service technicians when:
A power cord or plug is damaged
The power socket on the subwoofer or transmitter is damaged
Objects have fallen or liquid has spilled into the subwoofer or transmitter
The subwoofer or transmitter was rained on or has become partially or fully submerged in water
The subwoofer does not operate normally or exhibits a marked change in performance
The cabinet has been dropped or is damaged
The subwoofer driver’s cone and/or suspension is physically damaged
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velodyne Wi-Q12BVE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velodyne Wi-Q12BVE in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info