567745
22
Zoom out
Zoom in
Previous page
1/29
Next page
22
Restoring Defaults Wi-Q User’s Manual
Restoring Defaults
You can restore the factory default settings for your Wi-Q subwoofer by pressing PRESET buttons on the remote
in EXACTLY the following order:
Preset 1: Movies
Preset 2: R&B – Rock
Preset 3: Jazz – Classical
Preset 4: Games
Preset 4: Games
Preset 3: Jazz – Classical
Preset 2: R&B – Rock
Preset 1: Movies
When you press the presets in the above order, the front LED displays “P3” to indicate that you restored the factory
defaults—including resetting the volume level to 30 out of 80.
Maintain
Check/Replace Fuse
Your Velodyne Wi-Q subwoofer works in regions using 120V or 230V mains voltage. The unit switches itself
for use with either voltage level.
To replace the fuse, follow these steps:
1. On the back of the subwoofer, locate the fuse drawer slot
at the base of the power cord connector.
2. Insert a flat-blade screwdriver in the fuse drawer slot and
tilt the handle towards the subwoofer to open the fuse
drawer. (Do not attempt to detach the drawer from the
subwoofer.) The drawer contains two fuses - an active fuse
and a replacement fuse.
3. Carefully remove the active fuse. Hold it up to a light
source and see if the conductor in the glass tube is still
continuous from end to end. You can also compare it
to the replacement fuse. If the active fuse looks in any
way bad, move the replacement fuse into the active
cavity. There is no fuse polarity, so it doesn’t matter
which way it is inserted.
4. Push the fuse drawer into the back of the subwoofer
until it clicks into place.
Note: If a fuse burns out or becomes damaged, you must replace the fuse with the same size and value
of fuse.
Fuse
drawer
Slot
Figure 13: Fuse drawer slot
Storage cavity
Active cavity
Figure 14: Fuse drawer cavities
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velodyne Wi-Q12BVE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velodyne Wi-Q12BVE in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info